MOUNTING THE MODULE
You can place the module directly on a desk, shelf, or table. Or, you can mount the module on a wall. To mount the module on the wall, you need two screws (not supplied) with heads larger than the holes on the back of the supplied mounting bracket.
Follow these steps to mount the module on a wall.
1. Drill two holes into the wall 217 /32 | 217 | inch |
| 32 |
|
inches apart.
1
8 inc
2. While holding the side of the mounting bracket against the wall as shown, thread a mounting screw through each round hole in the mounting bracket then tighten the mounting screws into the wall.
23