Operation
Operation
When the telephone is not in use, the date and time, number of new and total number of calls STORED in the Caller ID MEM will be shown in the display. The display will show the caller number (and name if available).
Making a call
1.Pick up the handset or press 
button (the speaker LED will light) and wait for a dial tone.
2.Dial the number you wish to call. The display will show the number that you are dialling. If you dial a number over 14 digits long, it will show the last 14 digits only.
3.When you have completed your call, hang up the handset or press 
button again to release the telephone line.
It is possible to switch from a handset to speakerphone conversation by pressing the 
button and picking up or hanging up the handset accordingly.
Pre Dialing a Call
1.Dial the number you wish to call. To correct a number press the
DELETE/OK button for each incorrect digit.
2.Pick up the handset or press the 
button.
Receiving a Call
When you receive a call, the telephone rings, the Ringer LED flashes, and the display shows the CALL# and the callers telephone number (with caller id service activated).
This feature allows you to decide to pick up the phone or not depending on who is calling.
9