Special Features

Programming the Memory Buttons

You can automatically dial twelve programmed telephone numbers using the memory buttons shown in Figure 16. Each button can be pro- grammed (or reprogrammed using the same procedure) for a phone number up to 16 digits long.

Figure 16 - Memory Buttons

To program a button, follow these steps:

Figure 17 - PROG Button

1.Lift the handset and press PROG as shown in Figure 17.

2.Enter the phone number on the keypad (Figure 18) just as you would dial it normally.

Figure 18 - Telephone Keypad

3.Press PROG (Figure 17) once again.

4.Press a memory button (Figure 16) to store this number on that button.

5.Immediately hang up the handset. Note: Any number previously stored at that button number will be overwritten.

6.To change a stored number, repeat the programming process starting with step 1.