Ameriphone XL-25s operating instructions Ringer Volume and Pitch, Hold, Last Number Redial

Page 9

Using Your Dialogue XL-25s (Continued)

1.Adjust the IN VOL slide control in Figure 11 to suit your hearing.

Figure 11 - Tone Slide Control

Ringer Volume and Pitch

1.You can adjust the RINGER VOLUME as high as 75+ decibels. The settings available are OFF, LO and HI as shown in Figure 12.

Figure 12 - Ringer Volume & Pitch

2.The RING TONE has two pitch settings: LO and HI.

Hold

To put the line on hold, press the HOLD button and return the handset to its cradle. You will notice the red indicator light comes on.

Note: If you pick up an extension phone on the same line when the Dialogue XL-25s is on HOLD, the line will disconnect and you can continue your conversation on the extension phone.

Figure 13 - Hold Button

Last Number Redial

To redial the last number dialed with the Dialogue XL-25s phone, lift the handset and press REDIAL.

Figure 14 - Redial Button

7

Image 9
Contents DIALOGUEXLXL-25s Additional Safety Notes for Canadian Users Important Safety InstructionsContents Introducing the Dialogue XL-25s Warranty ServiceSales Receipt Help from AmeriphoneHold Features on the Dialogue XL-25sInstalling the Backup Batteries Setting up Your Dialogue XL-25sTo install new battery Setting the Dial ModeReversing the Hook Wall MountUsing Your Dialogue XL-25s Outgoing Voice VolumeIncoming Voice Volume Ringer Volume and Pitch HoldLast Number Redial Flash Button FlashProgramming the Memory Buttons Special FeaturesAudio Output Socket Direct Audio OutputSymptom Corrective Action Troubleshooting Chart FCC StatementWarranty Index Specifications
Related manuals
Manual 15 pages 4.3 Kb