Ameriphone Setting up Your Dialogue XL-25s, Installing the Backup Batteries

Setting up Your Dialogue XL-25s

There are four steps involved in setting up your Dialogue XL-25s.

•Insert one 9 volt alkaline battery for extra bright ring flasher

(optional)

Note: For your safety always unplug the phone line before you install or replace the backup battery.

•Decide if you want the phone to sit on a desk or hang on the wall.

•Connect the telephone components.

•Program up to to 12 telephone numbers to call with the press of a memory button.

•Setup special features

Installing the Backup Batteries

To add extra brightness to the Dialogue XL-25s’s ring flasher when you receive calls, install one 9 Volt alkaline battery (not included).

Note: For your safety always unplug the phone line before you install or replace the backup battery.

To install new battery:

1.Slide open the battery compart-- ment cover on the bottom of the telephone, (Figure 3).

2.Install one fresh 9-volt battery. The battery indicator on the base unit will light up if the battery is running low.

Setting the Dial Mode

Set the dial mode switch to T (tone) if you have touch tone service.

Set the switch to P (pulse) if you have rotary dialing.

Connecting for Desk or Wall Mount

Desktop Use

1.Connect the telephone line cord and the handset cord to the telephone as shown in Figure 4.

Figure 4 - Connecting the

Components

Figure 3

4