Panasonic CF-P1 LCD Backlight ON/OFF, Setting the Timeout Function of the LCD Backlight

Page 17

LCD Backlight ON/OFF

If the power switch is pressed for 0.5 - 1.0 sec. after the computer is turned on, the LCD backlight goes on or off.

Setting the Timeout Function of the LCD Backlight

The LCD backlight can be set to switch off automatically (e.g., for conserve power) by setting the timeout function. If the timeout function is set, the LCD backlight turns off auto- matically when the computer is not operated and the timeout expires. Individual settings can be made for battery use and AC adaptor use.

1 Tap [Start] - [Settings] - [Control Panel] in order, and then double-tap [Back- light].

2 Battery use setting: Tap the [Battery] tab. AC adaptor use setting: Tap the [External] tab.

Tapping this button closes the [Backlight Properties] window without saving the changes.

Add a check mark so that when the device is not oper- ated, the LCD backlight switches off automatically when the timeout expires.

Timeout

Add a check mark so that tapping the screen turns the

LCD backlight on.

(Only the LCD backlight goes on when the screen is tapped.)

(Example for [External].)

3 Tap [OK].

17

Image 17

Contents Operating Instructions Introduction Customers RecordIllustrations and Terminology in this Manual What’s in the Box?For U.S.A Read Me FirstLithium Battery Lithium BatteryFor Canada Pile au lithiumHandling PrecautionsPeripherals Battery PackPage Cursor Control Names and Functions of PartsAttaching the Strap Reset Switch DC-IN Jack Expansion ConnectorSpeaker Headphone JackConnecting the Cradle Connecting/Removing the CradleRemoving the Cradle CoverBattery Pack Cover Latch a Arrow Mark Install the battery packConnect your computer to a power outlet First-time OperationHandling the AC adaptor Turn your computer on Reset SwitchThis concludes the first-time use operation guidelines Starting Up/Shutting Down Power SwitchTo turn only the LCD backlight on To turn both the LCD backlight and keyboard backlight onTask Tray Shutting Down power offStart Menu and Taskbar LCD Touchscreen Using the StylusHandling the Touchscreen Adjust the LCD BrightnessCalibrating the Screen Tap OKLCD Backlight ON/OFF Setting the Timeout Function of the LCD BacklightKeyboard Inputting non-capital characters in the caps lock mode Changing the Keyboard Repeat SettingsProgram Buttons Option Button Program ButtonsChanging the Assignment of a Program Button Replacing the Battery Pack Battery PowerRemaining Battery Open the SD/Multi Media card slot cover Installing Installing/Removing an SD/Multi Media CardSD/Multi Media Card RemovingTo run Pocket Internet Explorer Pocket Internet ExplorerGetting Connected Setting up the CF-P1 Connecting to Your ComputerUsing a Cable When Connecting the CF-P1 Directly with a Computer Using the Infrared Communication PortWhen Connecting the CF-P1 with a Computer via the Cradle RemovingCustomizing the Computer Power PasswordRegional Settings Volume & SoundsResetting Your Computer Dealing with ProblemsPerforming a Reset Performing an All ResetApplication Software Starting UpDate and time are in- correct Computer shuts downScreen DisplayPosition a lamp so that the light shines directly on Areas excluding the LCD MaintenanceFor Effective Use Specifications Environment Physical DimensionsWeight Limited USE License Agreement Termes, clauses et conditions Contrat de licence d’usage limitéLicence Limits and Exclusions Limited Warranty For U.S.APanasonic Computer and Peripherals Limited Warranty Limited Warranty For CanadaMemo Disclaimer Trademarks CopyrightPanasonic Computer Solution Company Panasonic Canada Inc