Panasonic CF-P1 Battery Power, Remaining Battery, Replacing the Battery Pack

Page 21

Battery Power

Remaining Battery

1 Tap [Start] - [Settings] - [Control Panel] in order, and then double-tap [Power].

2 Tap the [Battery] tab.

The remaining battery charge is displayed.

When the Remaining Battery Charge Becomes Low Plug in the AC adaptor, and fully charge your battery.

Use a spare battery if you have one.

If you have neither the AC adaptor nor a spare battery, power off your computer.

Replacing the Battery Pack

When the charge provided by your battery pack is supplied for only a short period of time, even after full charging according to the instructions, it may be time to replace your battery pack. The battery pack is a consumable item and therefore requires replacement (CF- VZSU22).

Refer to page 11 about installing the battery pack.

CAUTION

Do not touch the terminals of the battery pack. The battery pack may no longer func- tion properly if the contacts are dirty or damaged.

The battery pack is not charged when the computer is first purchased. Be sure to charge it before using it for the first time. When the AC adaptor is connected to the computer, charging begins automatically.

Use only the specified battery pack (CF-VZSU22) with your computer.

21

Image 21

Contents Operating Instructions Introduction Customers RecordIllustrations and Terminology in this Manual What’s in the Box?For U.S.A Read Me FirstLithium Battery Lithium BatteryFor Canada Pile au lithiumHandling PrecautionsPeripherals Battery PackPage Cursor Control Names and Functions of PartsAttaching the Strap Reset Switch DC-IN Jack Expansion ConnectorSpeaker Headphone JackConnecting the Cradle Connecting/Removing the CradleRemoving the Cradle CoverBattery Pack Cover Latch a Arrow Mark Install the battery packConnect your computer to a power outlet First-time OperationTurn your computer on Reset Switch This concludes the first-time use operation guidelinesHandling the AC adaptor Starting Up/Shutting Down Power SwitchTo turn only the LCD backlight on To turn both the LCD backlight and keyboard backlight onShutting Down power off Start Menu and TaskbarTask Tray LCD Touchscreen Using the StylusHandling the Touchscreen Adjust the LCD BrightnessCalibrating the Screen Tap OKLCD Backlight ON/OFF Setting the Timeout Function of the LCD BacklightKeyboard Inputting non-capital characters in the caps lock mode Changing the Keyboard Repeat SettingsProgram Buttons Changing the Assignment of a Program ButtonProgram Buttons Option Button Battery Power Remaining BatteryReplacing the Battery Pack Open the SD/Multi Media card slot cover Installing Installing/Removing an SD/Multi Media CardSD/Multi Media Card RemovingPocket Internet Explorer Getting ConnectedTo run Pocket Internet Explorer Connecting to Your Computer Using a CableSetting up the CF-P1 When Connecting the CF-P1 Directly with a Computer Using the Infrared Communication PortWhen Connecting the CF-P1 with a Computer via the Cradle RemovingCustomizing the Computer Power PasswordRegional Settings Volume & SoundsResetting Your Computer Dealing with ProblemsPerforming a Reset Performing an All ResetApplication Software Starting UpDate and time are in- correct Computer shuts downDisplay Position a lamp so that the light shines directly onScreen Maintenance For Effective UseAreas excluding the LCD Specifications Physical Dimensions WeightEnvironment Limited USE License Agreement Contrat de licence d’usage limité LicenceTermes, clauses et conditions Limits and Exclusions Limited Warranty For U.S.APanasonic Computer and Peripherals Limited Warranty Limited Warranty For CanadaMemo Disclaimer Trademarks CopyrightPanasonic Computer Solution Company Panasonic Canada Inc