Panasonic KX-TC1220ALW operating instructions Service difficulties, PQQX13215ZA-BM S1001-0

Page 60

If you are satisfied with the operation of your telephone service after plugging in your Permitted Attachment, your installation is completed.

You will be unable to connect this Permitted Attachment if your telephone service consists only of a wall phone or an old style telephone which is not connected by means of a modern plug and socket. In such cases a new socket will need to be installed.

Should the Permitted Attachment not operate when plugged into a socket, it is either faulty or unsuitable for operation with your telephone service. It should be returned to the store where purchased or the Authorised Service Centre.

Service difficulties

If at any time a fault occurs on your telephone service carry out the following checks before you call for service:

•Disconnect the Permitted Attachment and try using the service with the normal telephone.

•If the telephone service then operates satisfactorily, the fault is in your Permitted Attachment. Leave the Permitted Attachment disconnected and report the fault to its supplier or agent to arrange for repair.

•If when using the telephone the service is still faulty, report the fault to “Service Difficulties and Faults” for attention.

You are required to keep this Permitted Attachment in good working order while it is connected to your telephone service. Its construction or internal circuit must not be modified in any way without permission.

WARNING

This cordless telephone system does not incorporate provision for secrecy of conversations. Appropriately tuned radio equipment and other cordless telephone systems in close proximity may be used by a third party to monitor and possibly interrupt conversations in progress when this system is on radio operation.

Kyushu Matsushita Electric Co., Ltd.

1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan

PQQX13215ZA-BM S1001-0

Page 59 Page 60
Image 60
Page 59 Page 60
Contents Charge the battery for about 10 hours before initial use Operating InstructionsAccessories included Before Initial UseFor your future reference Battery Charge For Best PerformanceBase Unit Location Contents Transferring a Call Using the Intercom Call Waiting and Caller ID Compatible For Australia onlyLocation of Controls HandsetBase unit Display 0266667777Preparation Display Settings ConnectionsInstalling the Battery in the Handset SettingsBattery strength Display prompt Battery strengthBattery information After your Panasonic battery is fully charged pStandby mode While the handset is off the base unit RechargeTime and Date Adjustment Make sure the unit is in the standby mode initiallyYou can select AM/PM or 24-hour clock by programming For Caller ID service users p To check the time and dateProgrammable Functions To select the recall time pDuring programming Setting the Auto Talk Feature Press Ö or Ñ repeatedly until the arrowPoints to Program Press á Yes keySelecting the Ringer Volume Programmable FunctionsWith the handset With the base unitSetting the LCD Contrast While the arrow points to LCDContrast, press á Yes key Press Ö or Ñ to select the desiredStoring Your Area Code To store your area codeTo erase your area code For New Zealand UsersMaking Calls With the HandsetIf noise interferes with the conversation To redial the last number dialled on the handsetMaking Calls With the Base Unit Digital Duplex Speakerphone To adjust the speaker volume 8 levels while talking To redial the last number dialled on the base unitTo put a call on hold To release the holdSimultaneous Keypad Dialling Useful informationAnswering Calls Auto TalkIf the handset is off the base unit, press Talk Talk into the MICCaller ID Service How caller information is displayed when a call is receivedHandset display shows Caller’s phone number after first ringCaller ID Service To check the number of new callsWhile the handset is on the base unit While the handset is off the base unitUsing the Caller List Viewing the Caller ListTo check who has called, follow the steps below To exit the list, press EXIT/CHUsing the Caller List Ex. When you search from the most recent callTo return to the previous caller To exit the Caller ListCalling Back from the Caller List Lift the handset off the base unitEditing the Caller’s Phone Number To add a numberTo erase the number Press FUNCTION/EDIT, then press Ü to erase the digitWhen the caller’s name is not displayed in the Caller List Storing Caller List Information in the DirectoryErasing Caller List Information To erase a specific caller from the Caller ListTo erase all entries in the Caller List Speed Dialler Storing Phone Numbers in MemoryDialling a Stored Number To erase a stored numberUsing the Directory Storing Names and Numbers in the DirectoryFor New Zealand Users Selecting Characters to Enter Names If you make a mistake while entering a nameNumber of times key is pressed Keys Using the Directory For example, to enter Tom JonesEight times Finding Items in the Directory To search for a name by initialDialling from the Directory Index tableKeys Index Editing an Item in the Directory Erasing an Item from the Directory Directory item you want to erasePress Ö or Ñ to select Clear Intercom Paging the base unit from the handsetPaging the handset from the base unit Handset locator Handset Press Intercom to answerTransferring a Call Using the Intercom IntercomFrom the handset to the base unit From the base unit to the handsetSpecial Features How to Use the Pause ButtonFor Analog PBX Line/Long Distance Service Users Automatic Security Code Setting Special FeaturesCall Waiting and Caller ID Compatible Recall ButtonSelecting the recall time Points to Set recallDesired time is displayed Wall Mounting Tuck the telephone line cord insideWall mounting adaptor, then Push it in the direction of the arrowTo charge the handset battery Wall TemplateBattery Replacement New battery for about 10 hours soThat the battery strength indicator appears p Close the cover. Make sure you chargeAdding Another Phone ProblemRemedy Before Requesting HelpProblem Remedy Before Requesting Help For Australian CustomersFor New Zealand Customers Safety Instructions SafetyInstallations Environment PlacementFor New Zealand Users Only Installation Important Information For Australia onlyInstructions to customer Service difficulties PQQX13215ZA-BM S1001-0

KX-TC1220ALW specifications

The Panasonic KX-TC1220ALW is a versatile cordless phone that combines ease of use with innovative features to provide an exceptional communication experience. Designed with user convenience in mind, this model stands out for its combination of traditional functionality and modern technology.

One of the most notable features of the KX-TC1220ALW is its cordless design, allowing users the freedom to move around their home or office while staying connected. The phone has a range of up to 300 meters, making it ideal for larger spaces where mobility is essential. Its lightweight design and comfortable grip make it easy to handle during long conversations.

Equipped with a DECT 6.0 technology, this model ensures clear voice quality and reduces interference from other devices. DECT (Digital Enhanced Cordless Telecommunications) provides enhanced security, minimizing the chances of eavesdropping and providing a more reliable connection compared to traditional cordless phones.

The KX-TC1220ALW also features a large, backlit LCD display, making it easy to read incoming caller information, even in low-light conditions. The phone has a 50-name and number phonebook, allowing users to store important contacts for quick access. With a 10-speed dial option, calling frequently used numbers becomes effortless.

Another impressive aspect of this phone is its long battery life. Featuring a rechargeable battery that offers up to 5 hours of talk time and up to 8 days on standby, users can rely on the KX-TC1220ALW to stay connected throughout the day without the constant need to recharge. The phone’s battery-saving technology further extends its longevity, ensuring it’s always ready for use.

Furthermore, the KX-TC1220ALW comes with useful features such as call waiting, caller ID, and a built-in speakerphone. This allows users to multitask while on calls, enhancing productivity in both personal and professional settings. The ringer volume can be adjusted according to user preference, making it customizable to different environments.

In summary, the Panasonic KX-TC1220ALW is a feature-rich cordless phone that provides a perfect blend of functionality, comfort, and advanced technology. Its DECT 6.0 technology, comprehensive phonebook, long battery life, and user-friendly interface make it a reliable choice for those seeking a dependable communication solution. Whether for home or office, it stands as a testament to Panasonic's commitment to quality and innovation in telecommunications.
Top Page Image Contents