515NL_e.book Page 65 Tuesday, July 15, 2003 1:53 PM
Multi-Unit User Operations
Cancelling a Handset
Each handset can cancel itself or another handset. This feature is usually used to cancel a link between Handset and Base Unit.
To exit the operation, press at any time.
1 | Press JOYSTICK (or move). | 2 | Select “ | Setting Base”. |
3 | Enter | 4 | Select “Cancel Handset”. | |
| (Factory Preset 0000) |
|
|
|
5 | Search and press RIGHT SOFT | 6 | Press JOYSTICK. | |
KEY to attach “ ” to the handset(s) |
|
|
to cancel.
Cancelling a Base Unit
If another handset is out of range and/or power is OFF when Cancelling a Handset, the previous base unit number will still remain in the cancelled handset. Therefore, you need to cancel the base unit registered in the cancelled handset.
To exit the operation, press at any time.
Follow steps 1 to 3 on the previous page, then:
4 | Select “Cancel Base”. | 5 | Enter |
|
|
| (Factory Preset 0000) |
6 | Search and press RIGHT SOFT KEY | 7 Press JOYSTICK. | |
| to attach “ ” to the base unit to cancel. |
|
|
8 Select “Yes”, then “Deleted” is displayed.
65
Cordless Telephone