Panasonic KX-TCD410NZ Important Information, Environment, Battery Caution, Location

Page 3

Important Information

Only use the power supply included with the product.

Do not connect the AC Adaptor to any AC outlet other than the standard AC230V. The apparatus is approved for use with PQLV19AL power supply.

This apparatus is unable to make emergency telephone calls under the following conditions:

•The portable handset batteries need recharging, or have failed.

•During a mains power failure.

•When the Key Lock is set to ON.

•When the unit is in Direct Call mode. Do not open the base unit or handset (other than to change the batteries). This apparatus should not be used near emergency/intensive care medical equipment and should not be used by people with pacemakers.

Care should be taken that objects do not fall onto, and liquids are not spilled into the unit. Do not subject this unit to excessive smoke, dust, mechanical vibration or shock.

Environment

Do not use this unit near water.

This unit should be kept away from heat sources such as radiators, cookers, etc. It should also not be placed in rooms where the temperature is less than 5°C or greater than 40°C.

The AC Adaptor is used as the main disconnect device, ensure that the AC outlet is located/installed near the unit and is accessible.

WARNING:

TO PREVENT THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY OTHER TYPE OF MOISTURE.

Battery Caution

Use only specified batteries.

Only use rechargeable batteries. Do not mix old and new batteries.

Do not dispose of batteries in a fire, they may explode.

Check local waste management codes for special disposal instructions.

Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed. Exercise care in handling the batteries in order not to short the batteries with conductive materials such as rings, bracelets and keys.

The batteries and/or conductor may overheat and cause burns.

Charge the batteries provided in accordance with the information given in this operating guide.

Location

•For maximum distance noise-free

operation, place your base unit:

-Away from electrical appliances such as TV, radio, personal computer or another phone.

-In a convenient high and central location.

Safety Caution

The ringer tone is reproduced through the earpiece. To avoid damage to hearing, first answer the call, then hold the phone to the ear.

Preparation

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model No. KX-TCD410NZ ContentsAccessories included Before Initial UseGeneral Warning Environment Battery CautionSafety Caution Important InformationSetting up Battery InstallationConnection Display icon Battery ChargeBattery Life Fully chargedSymbols Used in This Operating Instructions Selecting the Battery TypeReplacing the Batteries Base unit Location of ControlsHandset Display HandsetWall Mounting Making a Call Using the TelephonePower On/Off Setting the Clock/DateClearing One/All Dialled Items in the Redial List Making CallsRedialling Editing the Dialled Number in the Redial ListCaller ID Service For Using Telecom’s or Another Company’s Toll ServicesCaller ID Caller ID Display Clearing One/All Received Items in the Caller List Caller ID ListCalling Back Editing the Received Number in the Caller ListTemporary Bell Off Receiver VolumeAnswering Calls Auto TalkStoring a Caller Information PhonebookDialling with the Phonebook Editing a Caller InformationNumber Clearing a Caller InformationPhone Number *1 Name Clearing the Hot Key Registration Hot KeyRegistering a Phone Number as a Hot Key Dialling with Hot KeyBefore programming, please follow steps 1 to Handset SettingsTime Alarm Setting Time Alarm On/OffRinger Option Setting the Ringer VolumeSelecting the Standby Mode Display Tone OptionDisplay Option Digit Selecting the Talk Mode DisplayCall Option Call BAR On/OffSetting the Direct Call Number Setting the Direct Call On/OffOther Options Recall Feature Dialling Pause for PBX line/long distance service usersKey Lock Digit Base Handset Number Unit PIN*1 Base Unit SettingsPause Timing Cancelling Call Restricted Number 4 4-digit Base Unit PIN*1Selecting the Flash Timing 4 Base Unit 5 2 6 1 PIN *1Initial Settings Reset HandsetHandset Initial Settings Function Reset Base Unit Settings Base Unit Initial Settings FunctionDigit Base Unit PIN*1 Handset Registration to a Base Unit Multi-unit User OperationCancelling a Base Unit Cancelling a HandsetDigit Handset PIN *1 Number of Rings *3 Ringer Mode Selection Setting the All Handsets ModeSetting the Selected Handsets Mode Handset Numbers *2 Setting the Selected then All Handsets ModeBase Unit Selection Intercom Intercom between HandsetsTransferring a Call to Another Handset/Conference Call Before Requesting Help Problem Possible cause SolutionUseful Information Specifications Technical InformationConnections PIN IndexPage Page PQQX13521ZA D0303-0 For your future reference
Top Page Image Contents