Panasonic KX-TCD410NZ operating instructions Setting up, Connection, Battery Installation

Page 4

Setting up

Connection

Plug in the AC adaptor and the telephone line cord in order 1, 2, 3, 4.

Hook
1
2	4
	4

Fasten the AC adaptor cord to prevent it from being disconnected.

The AC adaptor must remain connected at all times (It is normal for the adaptor to feel warm during use).

•Never install telephone wiring during a lightning storm.

Battery Installation

Please ensure the batteries are inserted as shown. part should be inserted first. Close the cover as indicated by the arrow.

•When you replace the batteries, part should be removed first.

To replace the battery:

Press the notch on the cover firmly and slide it as indicated by the arrow. Replace 2 batteries and close the cover then charge the handset for about 7 hours.

Image 4

Contents Contents Model No. KX-TCD410NZBefore Initial Use Accessories includedGeneral Warning Battery Caution Safety CautionImportant Information EnvironmentBattery Installation Setting upConnection Battery Charge Battery LifeFully charged Display iconSelecting the Battery Type Symbols Used in This Operating InstructionsReplacing the Batteries Location of Controls Handset DisplayHandset Base unitWall Mounting Using the Telephone Power On/OffSetting the Clock/Date Making a CallMaking Calls RediallingEditing the Dialled Number in the Redial List Clearing One/All Dialled Items in the Redial ListFor Using Telecom’s or Another Company’s Toll Services Caller ID ServiceCaller ID Caller ID Display Caller ID List Calling BackEditing the Received Number in the Caller List Clearing One/All Received Items in the Caller ListReceiver Volume Answering CallsAuto Talk Temporary Bell OffPhonebook Storing a Caller InformationEditing a Caller Information NumberClearing a Caller Information Dialling with the PhonebookPhone Number *1 Name Hot Key Registering a Phone Number as a Hot KeyDialling with Hot Key Clearing the Hot Key RegistrationHandset Settings Time AlarmSetting Time Alarm On/Off Before programming, please follow steps 1 toSetting the Ringer Volume Ringer OptionTone Option Selecting the Standby Mode DisplayDisplay Option Selecting the Talk Mode Display Call OptionCall BAR On/Off DigitSetting the Direct Call On/Off Setting the Direct Call NumberOther Options Dialling Pause for PBX line/long distance service users Recall FeatureKey Lock Base Unit Settings Digit Base Handset Number Unit PIN*1Cancelling Call Restricted Number 4 4-digit Base Unit PIN*1 Selecting the Flash Timing4 Base Unit 5 2 6 1 PIN *1 Pause TimingReset Handset Initial SettingsHandset Initial Settings Function Base Unit Initial Settings Function Reset Base Unit SettingsDigit Base Unit PIN*1 Multi-unit User Operation Handset Registration to a Base UnitCancelling a Handset Cancelling a Base UnitDigit Handset PIN *1 Ringer Mode Selection Setting the All Handsets Mode Setting the Selected Handsets Mode Handset Numbers *2Setting the Selected then All Handsets Mode Number of Rings *3Base Unit Selection Intercom between Handsets IntercomTransferring a Call to Another Handset/Conference Call Problem Possible cause Solution Before Requesting HelpUseful Information Technical Information SpecificationsConnections Index PINPage Page For your future reference PQQX13521ZA D0303-0