Panasonic KX-TCD400AL operating instructions Environment, Battery Caution, Location

Page 5

Important Information

Only use the power supply included with the product.

Do not connect the AC Adaptor to any AC outlet other than the standard AC230 V. The apparatus is approved for use with PQLV200AL power supply.

This apparatus is unable to make emergency telephone calls under the following conditions:

The portable handset batteries need recharging, or have failed.

During a mains power failure.

When the Key Lock is set to ON.

When the unit is in Direct Call mode. Do not open the base unit or handset (other than to change the batteries). This apparatus should not be used near emergency/intensive care medical equipment and should not be used by people with pacemakers.

Care should be taken that objects do not fall onto, and liquids are not spilled into the unit. Do not subject this unit to excessive smoke, dust, mechanical vibration or shock.

Environment

Do not use this unit near liquid—for example, near a bath tub, washbowl, sink, etc. Damp basements should also be avoided.

The unit should be kept away from heat sources such as heaters, kitchen stoves, etc. It also should not be placed in rooms where the temperature is less than 5 °C or greater than 40 °C.

The AC Adaptor is used as the main disconnect device, ensure that the AC outlet is located/installed near the unit and is accessible.

WARNING:

TO PREVENT THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.

THE CORDLESS HANDSET IS MAGNETISED AND MAY RETAIN SMALL METALLIC OBJECTS.

Battery Caution

Use only specified batteries.

Only use rechargeable batteries. Do not mix old and new batteries.

Do not dispose of batteries in a fire, they may explode.

Check local waste management codes for special disposal instructions.

Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed. Exercise care in handling the batteries in order not to short the batteries with conductive materials such as rings, bracelets and keys.

The batteries and/or conductor may overheat and cause burns.

Charge the batteries provided in accordance with the information given in this operating guide.

Location

For maximum distance noise-free operation, place your base unit:

-Away from electrical appliances such as TV, radio, personal computer or another phone.

-In a convenient high and central location.

Preparation

5

Image 5
Contents Model No. KX-TCD400AL ContentsBefore Initial Use Accessories includedInstructions to customer InstallationImportant Information Service difficulties Location Battery CautionEnvironment Connection Setting upBattery Installation Battery Life Battery ChargeDisplay icon Battery strength Fully chargedReplacing the Batteries Symbols Used in This Operating InstructionsSelecting the Battery Type Handset Location of ControlsHandset Display Wall Mounting Power On/Off Using the TelephoneSetting the Clock/Date Making a CallClearing One/All Dialled Items in the Redial List Making CallsRedialling Answering Calls Receiver VolumeAuto Talk Temporary Bell OffStoring a Caller Information PhonebookNumber Editing a Caller InformationClearing a Caller Information Dialling with the PhonebookPhone Number *1 Name Storing the Number from the Redial List into the PhonebookRegistering a Phone Number as a Hot Key Hot KeyDialling with Hot Key Clearing the Hot Key RegistrationTime Alarm Handset SettingsSetting Time Alarm On/Off Before programming, please follow steps 1 toRinger Option Setting the Ringer VolumeSetting the Ringer Pattern for External Call/Alarm Tone Option Selecting the Display Language Selecting the Talk Mode DisplayDisplay Option Setting the Direct Call On/Off Setting the Direct Call NumberCall Option Call BAR On/OffOther Options Key Lock Recall FeatureDialling Pause for PBX line/long distance service users Digit Base Unit Settings4 Base Unit 5 2 6 1 PIN *1 Pause TimingHandset Initial Settings Function Initial SettingsReset Handset Settings Digit Base Unit PIN*1 Reset Base Unit SettingsBase Unit Initial Settings Function 1st Menu 2nd Menu 3rd Menu Handset Menu StructureBefore Requesting Help Possible cause SolutionConnections SpecificationsTechnical Information PIN IndexPQQX13654ZA F0803-1093 For your future reference