Panasonic KX-TCD400AL Base Unit Settings, Digit, Base Unit 5 2 6 1 PIN *1, Pause Timing

Base Unit Settings

Before programming, please follow steps 1 to 2.

1 2 "INPUT CODE"

Press MENU. Search/Select

"SETTING BS".

Changing Base Unit PIN

The factory preset is 0000. Once you have programmed the base unit PIN, you cannot confirm it. We recommend you write down the base unit PIN. If you forget it, please consult your nearest Panasonic Service Centre.

3 5 4 Current 4-digit Base Unit PIN 5 New 4-digit Base Unit PIN

6 New 4-digit Base Unit PIN again to verify

Selecting the Recall Time

You can select the recall time, 700 msec (milliseconds), or 100 msec depending on your PBX requirements.

4-digit	1	700 msec
3 3 4 Base Unit 5 2 6 1 7	OR		8
PIN*1	2	100 msec	Press OK.

Pause Timing

You can set the pause timing to 3 or 5 seconds, depending on your PBX requirements.

4-digit	1	3 Seconds
3 3 4 Base Unit 5 3	6 OR		7
PIN*1	2	5 Seconds	Press OK.

•To exit the operation, press any time.

•The factory preset is in shade.

*1 The factory preset is 0000.

Cordless Telephone

25