Panasonic KX-TCD400AL Battery Charge, Battery Life, Fully charged, Display icon Battery strength

Page 7

Setting up

Battery Charge

At the time of shipment, the batteries are not charged. To charge, place the handset on the base unit. Please charge the batteries for about 7 hours before initial use. During charging, the battery icon is as shown below.

Fully charged	During charging
(Flashing)
Display icon	Battery strength
	High
	Medium
	Low
	Needs to be
	charged

The handset which power is off will be turned on automatically when it is placed on the base unit.

In normal use, the handset and the base unit should be powered on at all times.

Battery Life

Battery life is dependent on use and conditions but in general when using fully charged Ni-MH batteries (700 mAh): Talk time: 10hrs approx.

Standby time: 120hrs approx.

When using Ni-Cd batteries (250 mAh): Talk time: 4hrs approx.

Standby time: 40hrs approx. (Times indicated are for peak performance.)

The batteries reach peak performance after several full charge/discharge cycles. The batteries cannot be overcharged unless they are repeatedly removed and replaced.

If battery life is shortened then please check that battery and charge terminals are clean.

For maximum battery life, it is recommended that the handset not be

recharged until battery icon flashes .

Preparation

7

Image 7

Contents Model No. KX-TCD400AL ContentsBefore Initial Use Accessories includedImportant Information InstallationInstructions to customer Service difficulties Environment Battery CautionLocation Battery Installation Setting upConnection Fully charged Battery ChargeBattery Life Display icon Battery strengthSelecting the Battery Type Symbols Used in This Operating InstructionsReplacing the Batteries Handset Display Location of ControlsHandset Wall Mounting Making a Call Using the TelephonePower On/Off Setting the Clock/DateRedialling Making CallsClearing One/All Dialled Items in the Redial List Temporary Bell Off Receiver VolumeAnswering Calls Auto TalkStoring a Caller Information PhonebookDialling with the Phonebook Editing a Caller InformationNumber Clearing a Caller InformationPhone Number *1 Name Storing the Number from the Redial List into the PhonebookClearing the Hot Key Registration Hot KeyRegistering a Phone Number as a Hot Key Dialling with Hot KeyBefore programming, please follow steps 1 to Handset SettingsTime Alarm Setting Time Alarm On/OffSetting the Ringer Pattern for External Call/Alarm Setting the Ringer VolumeRinger Option Tone Option Display Option Selecting the Talk Mode DisplaySelecting the Display Language Call BAR On/Off Setting the Direct Call NumberSetting the Direct Call On/Off Call OptionOther Options Dialling Pause for PBX line/long distance service users Recall FeatureKey Lock Pause Timing Base Unit SettingsDigit 4 Base Unit 5 2 6 1 PIN *1Reset Handset Settings Initial SettingsHandset Initial Settings Function Base Unit Initial Settings Function Reset Base Unit SettingsDigit Base Unit PIN*1 1st Menu 2nd Menu 3rd Menu Handset Menu StructureBefore Requesting Help Possible cause SolutionTechnical Information SpecificationsConnections PIN IndexPQQX13654ZA F0803-1093 For your future reference