Panasonic KX-TCD410AL Base Unit Settings, Digit Base Handset Number Unit PIN*1

Base Unit Settings

Before programming, please follow steps 1 to 2.

1 2 "INPUT CODE"

Press MENU. Search/Select

"SETTING BS".

Changing Base Unit PIN

The factory preset is 0000. Once you have programmed the base unit PIN, you cannot confirm it. We recommend you write down the base unit PIN. If you forget it, please consult your nearest Panasonic Service Centre.

3 5 4 Current 4-digit Base Unit PIN 5 New 4-digit Base Unit PIN

6 New 4-digit Base Unit PIN again to verify

Call Restriction

You can restrict selected handset(s) from dialling selected phone numbers. You can assign up to 10 call restriction numbers (up to 8 digits). If you dial a restricted number, the call does not connect and restricted number flashes.

3	6	4 4-digit Base			5 Handset Number		6
		Unit PIN*1			Select desired handset number.*2		Press RIGHT.
7 Phone Number 8					9	Press OFF.
	Enter phone		Press RIGHT.			OR
	number to be					To continue entering call
						restriction numbers, repeat
	restricted.
						the steps 7 to 8.
	(up to 8 digits)
						(up to 10 numbers)
Cancelling Call Restricted Handset(s)
3	6	4 4-digit Base		5	Handset	6	7
		Unit PIN*1			Number	Press RIGHT.	Press OFF.
					Select desired
					handset number.*3

•To exit the operation, press any time.

*1 The factory preset is 0000.

*2 The selected handset number flashes.

*3 The selected handset(s) number(s) will stop flashing.

Cordless Telephone

27