Panasonic RX-ED50 Using auxiliary equipment, Maintenance, Do steps and as described above Press

Page 23

OUT

AUX IN

Using auxiliary equipment

You can play or record sound from other equipment through

this unit's AUX IN terminal. Plug type: 3.5 mm stereo

Playback

Preparation: (when using batteries) Press [ ].

Press [ ] to switch to AUX mode.

Start playback on the equipment.

Recording

Do steps and as described above.

Press [ ].

When this unit and the other equipment are connected to each other, do not set input on both unit's to “AUX”. This can cause feedback noise to occur.

PHONES

Using headphones (not included)

Reduce volume before connection.

Avoid listening for prolonged periods of time to prevent hear- ing damage.

Plug type: 3.5 mm stereo

Maintenance

If the surfaces are dirty

To clean this unit, wipe with a soft, dry cloth.

If the surfaces are extremely dirty, use a soft cloth dipped in a soap-and-water solution or a weak detergent solution.

	•Never use alcohol, paint thinner, or benzine to clean this unit.		Reference
	•Before using chemically treated cloth, read the instructions		Reference

	that came with the cloth carefully.

	For a cleaner crisper sound

	Clean the heads regularly to assure good quality playback
	and recording. Use a cleaning tape (not included).

23

RQT5142

Image 23

Contents RX-ED50 Class Laser Product Table of contentsUse EB area code model onlyPrecautions Supplied accessoriesMemory back-up batteries Power sourcesOperating the unit on AC power Using batteries not includedTuner/CD controls Location of controlsBasic controls BeforeDo not Remote controlButtons UsePress Display Setting the timePress to turn the unit on Press CLOCK/TIMER to select Clock When batteries are usedDisc Press TAPE/CD to switch to CD modePress -,+ Volume to adjust the volume CDsOther modes of play Compact disc operationsCDs Full is displayed To check the contents of the programPress Program playOperations Radio manual tuningRadio Radio preset tuningPresetting radio stations Selecting channelsPress Deck 1 to open the deck and load a cassette Press TAPE/CD to switch to Tape modeCassettes Cassette deck operationsPress Deck 1/2 Press REV ModeCassettes Press REW-TUNE/ backward Or TUNE/ -FF forwardErasure prevention Before recordingRecording operations Erasing recordingsPress to start recording Recording CDs Deck 2 onlyPress Deck 2 to open the deck and load a cassette To record a track while it is being played Automatic CD recordingTo continue recording from another CD Recording tape-to-tape Recording the radio Press PLAY/REC Using the timer Timer operations Press CLOCK/TIMER to select the timer functionPress Sleep to select the time in minutes Sleep timerUsing the timer Sound quality Timer faderCreating a three dimensional sound field with S.Virtualizer Using headphones not included Using auxiliary equipmentMaintenance Press to switch to AUX mode Start playback on the equipmentTechnical specifications Troubleshooting