Panasonic KX-TG1811NZ, KX-TG1813NZ Guide to base unit settings, To customise the base unit

Useful Telephone Settings

Handset settings	Sub-menu	Feature (default setting)
menu
OTHER OPT	HSPIN CHANGE	Change handset PIN (“0000”).*4
		− Enter the current 4-digit handset PIN.*2
		− Enter the new 4-digit handset PIN.
		− Enter the new 4-digit handset PIN again.
	AUTO TALK	Auto talk on/off (“OFF”)*5
RESET HS	—————	Reset handset to its default settings.
		− Follow steps 1, 2, and 3.
		− Enter handset PIN (default: “0000”).*2
		− {v} i{>}

*1 Call bar feature prohibits making outside calls. When call bar is turned on, only emergency calls can be made. To store emergency numbers, see page 13.

*2 If you forget your PIN, consult your nearest Panasonic service centre.

*3 Direct call feature allows you to dial a preset phone number simply by pressing {C}. No dialling is necessary.

*4 If you change the PIN, please write down your new PIN as the unit will not reveal the PIN to you.

*5 Auto talk feature allows you to answer calls simply by lifting the handset off the base unit or charger. You do not need to press {C}.

Guide to base unit settings

To customise the base unit:

1{j/OK}

2Press {e} or {v} to select “SETTING BS”. i{>} L “INPUT CODE” is displayed.

3Enter the desired code number. Follow the instructions in the “Feature” column of the chart.

L To exit the operation, press {ih}.

Code No.	Feature (Default setting)
{0}	Reset base unit to its default settings.*1
	− Enter base unit PIN (default: “0000”).*2 i{>}
{3}	Recall time (600 ms)*3
	− Enter base unit PIN (default: “0000”).*2 i{2} i{1}
	− Select the desired setting by pressing {1} for 100 ms or {2} for 600
	ms. i{>}
{5}	Change base unit PIN (“0000”).*4
	− Enter the current 4-digit base unit PIN.*2
	− Enter the new 4-digit base unit PIN.
	− Enter the new 4-digit base unit PIN again.

12