Panasonic KX-TG1813NZ, KX-TG1811NZ, KX-TG1812NZ operating instructions Specifications, Wall mounting

Page 19

Useful Information

Specifications

■Number of channels: 120 Duplex Channels

■Frequency range: 1.88 GHz to 1.9 GHz

■Duplex procedure: TDMA (Time Division Multiple Access)

■Channel spacing: 1,728 kHz

■Bit rate: 1,152 kbit/s

■Modulation: GFSK (Gaussian Frequency Shift Keying)

■RF transmission power: Approx.

250 mW

■Power source: 220–240 V, 50 Hz

■Power consumption:

Base unit:

Standby: Approx. 3.5 W

Maximum: Approx. 9.2 W

Charger*1:

Standby: Approx. 0.6 W

Maximum: Approx. 5.0 W

■Operating conditions: 5 °C–40 °C, 20 %–80 % relative air humidity (dry)

■Dimensions:

Base unit: Approx. 58 mm ⋅ 123 mm ⋅ 115 mm

Handset: Approx. 143 mm ⋅ 48 mm ⋅ 32 mm

Charger*1: Approx. 60 mm ⋅ 86 mm ⋅ 84 mm

■Mass (weight):

Base unit: Approx. 180 g

Handset: Approx. 120 g

Charger*1: Approx. 120 g

*1 KX-TG1812 and KX-TG1813 only

Note:

L Specifications are subject to change.

L The illustrations used in these operating instructions may differ slightly from the actual product.

Wall mounting

Base unit

80 mm

Screws

Charger (KX-TG1812 and KX-TG1813 only)

28 mm

Screws

19

Image 19
Contents KX-TG1812NZ Your phone IntroductionAccessory items Quantity Included accessoriesEnvironment Battery cautionImportant information GeneralCharger KX-TG1812 and KX-TG1813 only ConnectionsImportant notice Base unitTurning the power on/off Battery installationBattery charge Charge contacts Charger KX-TG1812 and KX-TG1813 only ControlsDisplays HandsetNew calls Symbol MeaningDisplay language Date and timeAnswering calls Making callsHot key quick dial Adding entries to the phonebookMaking calls/Editing/Erasing Handset settings Sub-menu Feature default setting Menu Guide to handset settingsTo customise the handset Code No Feature Default setting Guide to base unit settingsTo customise the base unit Turning on/off call restriction Caller ID features Using Caller ID serviceStoring/Editing/Erasing Caller ID Service Intercom between handsets KX-TG1812 and KX-TG1813 only Problem Cause & solution TroubleshootingClean the charge contacts and charge again Wall mounting SpecificationsCopyright Customer Support Centre Tel. No 272 Sales Department