Panasonic KX-TG7202HK Base unit settings, To customise the base unit using the handset

Base Unit Settings

Base unit settings

To customise the base unit using the handset:

1{j/OK}

2Press {^} or {V} to select “Base Unit Setup”. i{>}

3Press {^} or {V} to select the desired item in the base unit settings menu. i

{>}

4Press {^} or {V} to select the desired item in the sub-menu. i{>}

5Press {^} or {V} to select the desired setting then press {>}.

L This step may vary depending on the feature being programmed. L To exit the operation, press {ih}.

Note:

L The current item or setting is indicated by > on the display.

Menu	Sub-menu	Details (default setting)
Call Options	Dial Mode	(“Tone”): page 12
	Recall/Flash	Flash time (“400 msec.”)*1
Other Options	Base Unit PIN	Change base unit PIN (“0000”).*2
		–	Enter the current 4-digit base unit
			PIN.*3
		–	Enter the new 4-digit base unit
			PIN. i{>} i{ih}
	Repeater Mode	(“Off”): page 22

*1 Change the flash time, if necessary, depending on the requirements of your service provider/telephone company or PBX.

*2 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you.

*3 If you forget your PIN, consult your nearest Panasonic service centre.

18