Registering a handset to the base unit

TG7200_7220E(e)_QG.fm Page 6 Tuesday, May 15, 2007 9:42 AM

Registering a handset to the base unit

The supplied handset and base unit are pre-registered. When you purchase an additional handset, refer to the additional handset’s installation manual for registration. If for some reason the handset is not registered to the base unit, register the handset.

1{j/OK}

2 {^}/{V}: “Handset Setup” i {>}

{j/OK}

3{^}/{V}: “Registration” i {>}

4 {^}/{V}: “Register H.set” i {>}

5Proceed with the operation for your model.

NKX-TG7200/KX-TG7202/KX-TG7203

Press and hold {x} on the base unit for about 5 seconds. (No registration tone)

{x}

NKX-TG7220/KX-TG7222/KX-TG7223/

KX-TG7224

Press and hold {x} on the base unit for about 5 seconds, until the registration tone sounds.

6Wait until “Enter Base PIN” is displayed.

iEnter the base unit PIN (default: “0000”).

i{j/OK}

{x}

{j/OK}

– 6 –