TGA914E(e).book Page 14 Friday, July 28, 2006 12:09 PM
Camera Monitoring
Handset display item for camera monitoring
Displayed Meaning item
Example: The handset is connected
8to the cordless camera. When flashing:
The cordless camera is paging the handset. (It detects sound or its call button is pressed.)
Paging the handsets from the cordless camera
The cordless camera can page handsets when it detects sound or by pressing its call button. Then the answering handset user can monitor live images from the cordless camera.
Important:
LOnly registered handsets can be paged from the cordless camera. The base unit cannot be paged.
LIf a handset is paged by the cordless camera during a call, 2 tones sound and zflashes on the handset. To monitor the cordless camera from the handset, press {ih}, then press {s}.
LAuto intercom feature cannot be used when paged by a cordless camera.
Paging using the camera audio sensor
Important:
LTo use the audio detection feature of the cordless camera, turn the audio detection sensitivity to on (page 15).
1 Camera:
The camera detects sound.
LThe camera produces a camera tone and pages the handsets for 1 minute.
2 Handset:
Press {s} to answer the page.
LYou can monitor the room where the camera is located.
3 Handset:
To mute your sound output, press {C/T} if necessary.
4 Handset:
When you finish monitoring, press {ih} or place the handset on the base unit or charger.
Paging using the cordless camera call button
1 Cordless camera: Press the call button.
LThe cordless camera produces a camera tone and pages the handsets for 1 minute.
LTo stop paging, press the call button again.
2 Handset:
Press {s} to answer the page.
LYou can monitor the room where the cordless camera is located.
3 Cordless camera:
When the handset user answers, speak clearly into the MIC.
14 | Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333 | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|