Charging the battery
Place the handset on the charger and charge for 7 hours before initial use.
•The CHARGE indicator will light, and “Charging” is
displayed.
• When the battery is fully charged, “Charge completed” Charge Contacts is displayed.
•Recharge the battery when:
— “Recharge battery” is displayed on the handset,
— “2” flashes,
— the handset beeps every 60 seconds while it is in use or in standby mode.
CHARGE Indicator
Handset battery information
After your Panasonic battery is fully charged, you can expect the following performance:
Operation | Operating time |
While in use (TALK) | Up to 15 hours |
|
|
While not in use (Standby) | Up to 7 days |
|
|
•Clean the charge contacts of the handset and the charger with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the battery may not charge properly.
Belt Clip
You can hang the handset on your belt or pocket using the included belt clip.
To attach the belt clip | To remove the belt clip |
– 2 –