Panasonic KX-TCA255 operating instructions Troubleshooting, Problem Description and Solution

		Troubleshooting
Troubleshooting
	Troubleshooting
	Problem	Description and Solution
	The PS does not work.	• The battery is drained.
		→ Charge the battery fully. (See “Battery Charge” on page 7.)
		• The PS has been cancelled or the PS has not been
		registered.
		→ Consult your dealer.
		• The power is OFF.
		→ Turn it ON. (See “Power On/Off” on page 8.)
	The PS does not ring.	• Ringer volume is set to “Off”.
		→ Adjust the ringer volume level. (See “Ringer Volume
		Adjustment” on page 13.)
	You cannot make/receive a call.	• The PS is out of range or the Cell Station (CS) is busy.
		→ Move closer to the CS or try again later.
		• The radio channel is busy or a radio communication error
		occurred.
		→ Try again later.
	You cannot dial.	• The number which you dialled is restricted by the
		Business Telephone System.
		→ Consult your dealer.
		• The key lock mode is ON.
		→ To cancel the mode, press the Joystick for about 2 seconds.
		(See “Key Lock” on page 14.)
		• The radio channel is busy or a radio communication error
		occurred.
		→ Try again later.
	Noise is frequently heard.	→ Set the PS and CS away from other electrical appliances.
		→ Move closer to the CS.
	“CS BUSY” is displayed.	• The Cell Station is busy.
		→ Try again later.
	“PS Not Connected” is	• The called PS is out of range or the PS is power off.
	displayed.	→ Try again later.
	The PS stops working during	→ Turn the power OFF and ON, then try again. (See “Power
	operation.	On/Off” on page 8.)
		→ Reinsert the batteries and try again. (See “Battery
		Installation” on page 7.)
	Two short beeps are heard	• The radio signal is weak.
	during a conversation.	→ Move closer to the CS.

51