Panasonic KX-TG9361BX Registering a handset to a base unit, Deregistering a handset

TG9361BX(e)_OI.book Page 24 Wednesday, April 16, 2008 3:08 PM

Programming

Registering a handset to a base unit

The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, register the handset.

1Handset:

{MENU} i{#}{1}{3}{0}

2Base unit:

Press and hold {LOCATOR} for 4 seconds. (No registration tone) L If all registered handsets start

ringing, press the same button to stop. Then repeat this step.

L The next step should be completed within 90 seconds.

3Handset:

Press {OK}, then wait until a long beep sounds.

4{OFF}

Note:

L While registering, “Base registering” is displayed on all registered handsets.

L When you purchase an additional handset, refer to the additional handset’s installation manual for registration.

Deregistering a handset

A handset can cancel its own registration (or the registration of another handset) that is stored in the base unit. This allows the handset to end its wireless connection with the system.

1{MENU} i{#}{1}{3}{1}

2{3}{3}{5} i{OK}

3Select the handset you want to cancel by pressing the desired handset number.

24