TG1311_1312_1313BX(e).book Page 12 Tuesday, September 2, 2008 10:36 AM
Useful Telephone Settings
One touch dialling (Hot key)
Assigning an entry in the phonebook to a one touch dial key
Dial keys {1} to {9} can each be used as a one touch dial key, allowing you to dial a number from the phonebook by simply pressing a dial key.
1{k} i{v}/{e}: Select the desired entry. i{j/OK}
2{v}/{e}: “HOT KEY REG” i{>}
3{v}/{e}: Select the desired dial key. i{>}
L If the dial key is already assigned as a one touch dial key, the displayed number flashes.
4{v}/{e}: “YES” i{>} i{ih}
Making calls/cancelling a one touch dial assignment
1Press and hold the desired one touch dial key ({1} to {9}).
2■ Making calls:
{C}
■Cancelling a one touch dial assignment:
{>} 2 times i{v}/{e}: “YES” i{>} i{ih}
Guide to handset settings
To customise the handset (general approach):
1{j/OK}
2Press {v} or {e} to select “SETTING HS”. i{>}
3Press {v} or {e} to select the desired item in the handset settings menu. i{>}
4Press {v} or {e} to select the desired item in the
5Press {v} or {e} to select the desired setting. i{>}
L This step may vary depending on the feature being programmed. L To exit the operation, press {ih}.
Note:
L In the following table, < > indicates the default settings.
Menu | Page | |
TIME ALARM | SET TIME | 13 |
| SET ALARM <OFF> | — |
RINGER OPT | RINGER VOL <level 6> | — |
| EXT RINGER*1 <RING TYPE 1> | — |
| INT RINGER <RING TYPE 1> | — |
| PAGING <RING TYPE 1> | — |
| ALARM <RING TYPE 1> | — |
TONE OPT | KEY TONE <ON> | — |
| CALL WAITING <ON> | — |
| RANGE ALARM <OFF> | — |
| BATTERY LOW <ON> | — |
12