Panasonic KX-TG1032 Setting the unit before use, Display language, Voice guidance language

Preparation

Display

Handset display items

Displayed	Meaning
item
w	Within range of the base
	unit
	LWhen flashing:
	Handset is searching
	for base unit. (out of
	range of base unit,
	handset is not
	registered to base
	unit, no power on
	base unit)
5	Battery level
Example:	The handset’s
[1]	extension number
	(example shown here:
	handset 1)
In use	Line or answering
	system is being used by
	another handset or the
	base unit.

Setting the unit before use

Display language

You can select either “English” or “Español” as the display language. The default setting is “English”.

1{MENU}

2{V}/{^}: “Handset settings” i

{OK}

3{V}/{^}: “Display settings” i

{OK}

4{V}/{^}: “Change language” i

{OK}

5{V}/{^}: Select the desired setting.

6{OK} i{OFF}

Note:

LHow to change from Spanish back to English:

1{MENU}

2{V}/{^}: “Ajuste portátil”

i{OK}

3{V}/{^}: “Ajuste pantalla”

i{OK}

4{V}/{^}: “Cambiar idioma” i

{OK}

5{V}/{^}: “English“ i{OK} i

{OFF}

Voice guidance language

You can select either “English” or “Español” as the voice guidance language of the answering system. The default setting is “English”.

1{MENU}

2{V}/{^}: “Answering device” i

{OK}

3{V}/{^}: “Settings” i{OK}

4{V}/{^}: “Voice prompt” i{OK}

5{V}/{^}: Select the desired setting.

6{OK} i{OFF}

Dialing mode

If you cannot make calls, change this setting according to your telephone line service. The default setting is “Tone”. “Tone”: For tone dial service. “Pulse”: For rotary/pulse dial service.

1{MENU}

2{V}/{^}: “Set tel line“ i{OK}

3{V}/{^}: “Set dial mode“ i

{OK}

4{V}/{^}: Select the desired setting.

5{OK} i{OFF}

14For assistance, please visit http://www.panasonic.com/help