TG1611SA(e).book Page 16 Monday, April 4, 2011 9:08 AM
Programming
Main menu | Page | ||
Setup | Language | – | 10 |
| <English> |
|
|
| Contrast | – | – |
| (Display contrast) |
|
|
| <Contrast 03> |
|
|
| Clock Disp.*5 | – | – |
| <On> |
|
|
| Auto Talk*6 | – | 11 |
| <Off> |
|
|
| Register HS | – | 27 |
| Keytones*7 | – | – |
| <On> |
|
|
| Dial Mode*3 | – | 10 |
| <Tone> |
|
|
| Recall/Flash*3, *8 | – | 12 |
| <100 msec.> |
|
|
| Privacy Mode*3, *9, *10 | – | – |
| <Off> |
|
|
| Change PIN*3 | – | 27 |
Intercom*9 | – | – | 21 |
*1 Ringer volume cannot be turned off for paging.
*2 If you select one of the melody ringer tones, the ringer tone continues to play for several seconds even if the caller has already hung up. You may either hear a dial tone or no one on the line when you answer the call.
*3 If you program these settings using one of the handsets, you do not need to program the same item using another handset.
*4 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received.
To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 10).
*5 When this feature is set to off, the handset number is displayed.
*6 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*7 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any keys.
*8 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary.
*9
*10To prevent other users from joining your conversations with outside callers, turn this feature on.
16