TG1611SA(e).book Page 26 Monday, April 4, 2011 9:08 AM
Useful Information
Caller ID
Problem | Cause/solution |
Caller information is not displayed. | L You must subscribe to a Caller ID service. Contact |
| your service provider/telephone company for details. |
| L If your unit is connected to any additional telephone |
| equipment, remove and plug the unit directly into the |
| wall jack. |
| L If you use a DSL/ADSL service, we recommend |
| connecting a DSL/ADSL filter between the base unit |
| and the telephone line jack. Contact your DSL/ADSL |
| provider for details. |
| L Other telephone equipment may be interfering with |
| this unit. Disconnect the other equipment and try |
| again. |
Caller information is slow to display. | L Depending on your service provider/telephone |
| company, the unit may display the caller’s |
| information at the 2nd ring or later. |
| L Move closer to the base unit. |
Time on the unit has shifted. | L Incorrect time information from incoming Caller ID |
| changes the time. Set the time adjustment to |
| “Manual” (off) (page 15). |
Liquid damage
Problem | Cause/solution |
Liquid or other form of moisture has | L Disconnect the AC adaptor and telephone line cord |
entered the handset/base unit. | from the base unit. Remove the batteries from the |
| handset and leave to dry for at least 3 days. After the |
| handset/base unit are completely dry, reconnect the |
| AC adaptor and telephone line cord. Insert the |
| batteries and charge fully before use. If the unit does |
| not work properly, contact an authorised service |
| centre. |
Caution:
LTo avoid permanent damage, do not use a microwave oven to speed up the drying process.
26