TG1611SA(e).book Page 25 Monday, April 4, 2011 9:08 AM
| Useful Information |
|
|
Programmable settings |
|
|
|
Problem | Cause/solution |
The display is in a language I | L Change the display language (page 10). |
cannot read. |
|
|
|
Battery recharge |
|
|
|
Problem | Cause/solution |
The handset beeps and/or 8 | L Battery needs charging. Fully charge the batteries |
displays. | (page 8). |
I fully charged the batteries, but | L Clean the battery ends (S, T) and the charge |
– battery level does not increase or | contacts with a dry cloth and charge again. |
–the operating time seems to be L It is time to replace the batteries (page 7). shorter.
Making/answering calls, intercom
Problem | Cause/solution |
w is flashing. | L The handset is too far from the base unit. Move |
| closer. |
| L The base unit’s AC adaptor is not properly |
| connected. Reconnect AC adaptor to the base unit. |
| L The handset is not registered to the base unit. |
| Register it (page 27). |
Noise is heard, sound cuts in and | L You are using the handset or base unit in an area |
out. | with high electrical interference. |
| base unit and use the handset away from sources of |
| interference. |
| L Move closer to the base unit. |
| L If you use a DSL/ADSL service, we recommend |
| connecting a DSL/ADSL filter between the base unit |
| and the telephone line jack. Contact your DSL/ADSL |
| provider for details. |
| L Unplug the base unit’s AC adaptor to reset the unit |
| and turn off the handset. Reconnect the adaptor, turn |
| on the handset and try again. |
The handset does not ring. | L The ringer volume is turned off. Adjust ringer volume |
| (page 12). |
I cannot make a call. | L The dialling mode may be set incorrectly. Change |
| the setting (page 10). |
LThe handset is too far from the base unit. Move closer and try again.
LAnother unit is in use.*1 Wait and try again later.
*1
25