Operating the built-in answering device
Activating the answering device
消去 | 留守 | light on/flash |
|
聞き直し
1 2 3
4 | 5 | 6 | スタート |
/コピー
7 8 9
0
1 Turn the 留守
(Auto answer) light on by pressing
留守
.
2 When receiving a call, a greeting message will be played and the unit will record a voice message.
●To record your own greeting message, see page 11.
Listening to recorded messages
When new messages are recorded, the 留守
(Auto answer) light will flash.
Press 留守
to listen to a recorded message.
Listening to all of the recorded messages
Press 聞き直し (Replay).
Erasing a specific message
1 Press | 消去 | (Erase) while listening to the message |
you want to erase. | ||
2 Press | /コピー | (Start). |
| スタート |
|
Erasing all of the recorded message
1 Press 消去 (Erase).
2 Press スタート (Start).
/コピー
Erasing your own greeting message
1 Press | 消去 | (Erase) twice. |
2 Press | スタート | (Start). |
/コピー |
●
Operating the answering device from a remote location
機能 | 登録 | 留守 | light on |
1 2 3
4 5 6
7 8 9
0
ストップ
Preparation: Programming the remote operation ID
1.Press 機能 (Function).
2.Press 
0 0 6 .
3.Enter any
or #.
4.Press 登録 (Register).
ストップ
5.Press 
(Stop).
Operation: Listening to a recorded message from a remote location
Turn the 留守
(Auto answer) light on before you go out. Remote operations are available only from a touch tone telephone.
1.Call your unit.
2.Enter the remote operation ID during the greeting message.
3. Press 2 or wait 4 seconds.
●Only the new recorded messages will be played back.
● To listen to all the recorded messages, press 4 after the new messages have been played back.
12