Panasonic KX-T2375SUW operating instructions Speed Dialer, Storing Phone Numbers in Memory

Page 16
Speed Dialer

PQQX13163ZA-BM03 02.6.19 2:13 PM ページ 16

Speed Dialer

Storing Phone Numbers in Memory

You can store up to 10 phone numbers in memory. The dialing buttons

((0) to (9)) function as memory stations. Do not press any memory stations before storing to prevent misoperation.

Make sure that a call is not put on hold.

Memory Station Numbers

(PROGRAM)

Storing Phone Numbers in Memory (AUTO/LOWER)

 

(PAUSE)

 

(SP-PHONE/HEADSET) and

 

Indicator

1

Press (PROGRAM).

2

Enter a phone number, up to 22 digits.

If you enter a wrong number, press

 

(PROGRAM) and start again from step 1.

3

Press (AUTO/LOWER).

4

Press a memory station number ((0) to

(9)).

A long beep sounds.

The unit will return to the standby mode.

If 3 beeps sound, the number entered in step 2 may be over 22 digits. Lift the handset and place it on the cradle to return to the standby mode, and start again from step 1.

You can exit the programming mode in step 1 and 2 by pressing (PROGRAM). If a pause is required for dialing, press (PAUSE) where needed. Pressing

(PAUSE) counts as one digit (p. 21).

16

Image 16
Contents Preparation Basic Operation Advanced Operation Useful InformationModel No. KX-T2375SUW Operating InstructionsAccessories included Before Initial UseFor your future reference Thank you for purchasing your new Panasonic integrated telephoneContents Location of Controls Display Settings Installing the BatteriesConnecting the Handset/Telephone Line Cord Connecting a Communication Device Programming Summary of PreparationsVOLUME Location of ControlsDisplay Settings Installing the BatteriesConnecting the Handset/Telephone Line Cord After connection, lift the handset to check for a dial toneConnecting a Communication Device Programming Summary of Preparations “ SettingsMake sure that a call is not put on hold Selecting the Dialing Mode 5 Press PROGRAM. ≥A long beep soundsTime Adjustment You can select AM/PM or 24-hour clock by programmingPress MUTE Press Press # to select AM, PM or 24-hourSetting the LCD Contrast Selecting the Ringer VolumeWall Mounting Wall TemplateUsing the speakerphone Making CallsBasic Operation To redial the last number dialedTo increase, press VOLUME . To decrease, press VOLUME If using the speakerphone, press SP-PHONE/HEADSET“ Making Calls To put a call on holdUsing the speakerphone Answering CallsTalk into the MIC microphone To hang up, press SP-PHONE/HEADSETSpeed Dialer Storing Phone Numbers in MemoryYou can store up to 10 phone numbers in memory. The dialing buttons Enter a phone number, up to 22 digitsDialing a Stored Number To erase a stored number9 for the phone number to be erasedTo store in an UPPER memory location One-Touch DialerPress one of the one-touch auto dial buttons To store in a LOWER memory location PROGRAM and start again from step“ One-Touch Dialer From an UPPER memory locationOR From a LOWER memory location Memory cardSpecial Features For Call Waiting Service UsersHow to Use the PAUSE Button For Rotary or Pulse Service Users“ Special Features Muting Your ConversationTurning Music Played During the Hold ON/OFF Press MUTE while talkingFLASH Button Selecting the flash timeSetting the PIN Code To cancel the dial lock Dial LockTo set the dial lock Enter the PIN code pTo set the call restriction Call RestrictionEnter the PIN code p. 24. Ex. Your PIN code is “1234” To cancel the call restriction Using the Optional HeadsetConnecting the Optional Headset to the Unit “ Using the Optional Headset Make sure to install the batteriesTo adjust the headset receiver volume 4 levels While using the headset, press VOLUME orBattery Replacement ProblemRemedy Before Requesting HelpSafety Instructions Useful InformationInstallations Environment PlacementPQQX13163YA F0701-1112 D 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan