Panasonic KX-T2375SUW operating instructions Display, Preparation

Page 5

PQQX13163ZA-BM02 02.6.19 2:11 PM ページ 5

Display

(This display shows all of the possible conﬁgurations.)

: In the standby mode, the display shows the current time. (Ex. 12:00AM)

: During a conversation, the call duration is displayed. (Ex. 2 hours, 14 minutes, 30 seconds)

: (FLASH) was pressed.

: (PAUSE) was pressed while storing phone numbers.

: ($) was pressed while dialing.

: (#) was pressed while dialing.

: (AUTO/LOWER) was pressed (p. 16, 19).

: (MUTE) was pressed during a conversation (p. 22).

: The unit plays music during the hold for a caller.

: The unit is in the clock setting mode.

: The unit is in the programming mode (p. 8).

: The dial lock mode is set. To cancel the mode, see page 25.

: This display ﬂashes, when the battery power is low. To replace the batteries, see page 29.

Preparation

Image 5

Contents Basic Operation Advanced Operation Useful Information PreparationModel No. KX-T2375SUW Operating InstructionsBefore Initial Use Accessories includedFor your future reference Thank you for purchasing your new Panasonic integrated telephoneLocation of Controls Display Settings Installing the Batteries ContentsConnecting the Handset/Telephone Line Cord Connecting a Communication Device Programming Summary of PreparationsLocation of Controls VOLUMEDisplay Installing the Batteries SettingsConnecting the Handset/Telephone Line Cord After connection, lift the handset to check for a dial toneConnecting a Communication Device Make sure that a call is not put on hold “ SettingsProgramming Summary of Preparations 5 Press PROGRAM. ≥A long beep sounds Selecting the Dialing ModeYou can select AM/PM or 24-hour clock by programming Time AdjustmentPress MUTE Press Press # to select AM, PM or 24-hourSelecting the Ringer Volume Setting the LCD ContrastWall Template Wall MountingMaking Calls Using the speakerphoneBasic Operation To redial the last number dialedIf using the speakerphone, press SP-PHONE/HEADSET To increase, press VOLUME . To decrease, press VOLUME“ Making Calls To put a call on holdAnswering Calls Using the speakerphoneTalk into the MIC microphone To hang up, press SP-PHONE/HEADSETStoring Phone Numbers in Memory Speed DialerYou can store up to 10 phone numbers in memory. The dialing buttons Enter a phone number, up to 22 digitsTo erase a stored number Dialing a Stored Number9 for the phone number to be erasedPress one of the one-touch auto dial buttons One-Touch DialerTo store in an UPPER memory location PROGRAM and start again from step To store in a LOWER memory locationFrom an UPPER memory location “ One-Touch DialerOR From a LOWER memory location Memory cardFor Call Waiting Service Users Special FeaturesHow to Use the PAUSE Button For Rotary or Pulse Service UsersMuting Your Conversation “ Special FeaturesTurning Music Played During the Hold ON/OFF Press MUTE while talkingSelecting the ﬂash time FLASH ButtonSetting the PIN Code Dial Lock To cancel the dial lockTo set the dial lock Enter the PIN code pEnter the PIN code p. 24. Ex. Your PIN code is “1234” Call RestrictionTo set the call restriction Connecting the Optional Headset to the Unit Using the Optional HeadsetTo cancel the call restriction Make sure to install the batteries “ Using the Optional HeadsetTo adjust the headset receiver volume 4 levels While using the headset, press VOLUME orBattery Replacement Before Requesting Help ProblemRemedyUseful Information Safety InstructionsInstallations Environment Placement1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan PQQX13163YA F0701-1112 D