Preparation
Battery installation and replacement
Installing the batteries
1Press down in the direction of the arrow and open the cover (1).
2Install the batteries in the proper order as shown (2), matching the correct polarity.
3Close the battery cover.
≥After battery installation, the unit will reset and “SET CLOCK” will always display until the time is set.
≥To set the clock, see page 12.
≥Batteries are not included with the unit.
≥Install three high quality “AA” size Alkaline (LR6) or Manganese (R6,
Battery life is: j about six months when using Alkaline batteries.
jabout three months when using Manganese batteries.
≥Battery life may depend on usage conditions and ambient temperature.
≥Make sure batteries were inserted properly inphase to ensure the functionality of this unit.
THE UNIT MAY NOT WORK PROPERLY WITHOUT BATTERIES.
Replacing the batteries
If “
” flashes, the battery power is low. Install new batteries as soon as possible. If batteries are not replaced even after the
“
” is displayed, the unit may not work properly.
≥ Store the desired items in the phonebook, because after the battery replacement, the information stored in the redial list will be cleared.
1Disconnect the telephone line cord from the unit.
2Press down in the direction of the arrow and open the cover.
3Replace the batteries with new ones using correct polarity (+,
4Connect the telephone line cord to the unit.
Battery precautions:
The batteries should be used correctly, otherwise the unit may be damaged by battery leakage.
sdo not mix different types of batteries.
sdo not charge,
sremove all the batteries when replacing.
Note:
sif you do not install the batteries or if the battery power is low, the display will become blank. Readjust the time after the battery replacement.
sreplace all the batteries every six months if using Alkaline batteries, or misoperation may occur. (When you use Manganese batteries, replace all of them every three months.)
sdo not use
8