Useful Information
Troubleshooting
Problem | Cause/solution |
The unit does not work. | ≥ Check the connections (page 9). |
| ≥ Remove the batteries and reinstall them to reset the unit. |
|
|
The unit does not ring. | ≥ The RINGER selector is set to OFF. Set to HIGH or LOW |
| (page 16). |
|
|
The display is blank. | ≥ Install new batteries (page 8). |
|
|
You cannot dial. | ≥ Check the dial tone. If there is no dial tone, check the |
| connections (page 9). |
| ≥ The dialling mode may be set incorrectly. Change the |
| settings (page 12). |
| ≥ Dial lock is turned on. To turn it off, see page 18. |
| ≥ The dialled number is restricted. To cancel, see page 14. |
|
|
The other party suddenly | ≥ {HANDSET MUTE} may has been pressed during the |
cannot hear your voice during | conversation. |
a conversation. | To cancel, press {HANDSET MUTE} again (page 17). |
|
|
You cannot program items | ≥ Programming is not possible when: |
such as the dialling mode. | s the handset is off the cradle. |
| s viewing caller information. |
| ≥ Do not pause for over 60 seconds while programming. |
|
|
Caller information is not | ≥ You need to subscribe to a Caller ID service. Consult your |
displayed. | service provider/telephone company for details. |
| ≥ Install or replace the batteries. |
| ≥ If your unit is connected to any additional telephone |
| equipment such as a Caller ID box or cordless telephone |
| line jack, plug the unit directly into the wall jack. |
| ≥ If you use a DSL/ADSL service, we recommend connecting |
| a DSL/ADSL filter between the unit and the telephone line |
| jack. Contact your DSL/ADSL provider for details. |
| ≥ Other telephone equipment may be interfering with your |
| phone. Disconnect it and try again. |
|
|
Number of missed calls does | ≥ You have entered the caller list before and there is no new |
not display during standby | missed call coming in after that. |
mode. | If there are unviewed missed calls, number of missed calls |
| will be displayed when you enter the caller list. |
|
|
You cannot store a name and | ≥ Programming is not possible when the handset is off the |
phone number in memory. | cradle. |
| ≥ Check that the batteries are installed in the unit and that |
| the battery power is not low. |
| ≥ Do not pause for over 60 seconds while storing. |
| ≥ Do not enter a phone number more than 32 digits long. |
| ≥ When using the dial lock (page 18) or call restriction feature |
| (page 14), you cannot store emergency numbers (#). |
| ≥ If “PHONEBOOK FULL” is displayed, erase other stored |
| items from the phonebook memory (page 20). |
|
|
24