Location of controls
n
i | ! | |
Switching Systems and can perform most functions within each | ||
|
s y s t e m .
0 INTERCOM Button and
Indicator:
Used for making or receiving
an intercom call.
@ REDIAL Button:
Radials the last number dialed.
@FLASH Button:
Used for sending the hook flash signal to the CO line.
8 Programmable Feature Buttons: Dials or accesses the system feature with one touch.
@Flexible CO Line Buttons and Indicators’:
Used for dialing via CO line. Direct Station Selection, or Programmable Feature buttons.
@Flexible Message Waiting
Button and Indicator:
Used for Message Waiting, Direct Station Selection, or Programmable Feature button,
0 TRANSFER Button: Transfers a call to any extension.
@PAUSE Button:
Inserts a pause between the access number and the phone number.
@AUTO DIAUSTORE Button and Indicator:
Used for dialing the system speed dialing/For storing functions into memory.
@CONFERENCE Button:
Used for speaking with three parties at the same time.
Q MONITOR Button and
Indicator:
Used for making a call without
using the handset.
,e HOLD Button:
Places a call on hold.
‘These functions are limited to the specified EMSS Control Units. Refer to the Installation manual.
_ 7- |
Home Automation Systems, Inc. (800)