Panasonic IP8840 manual Enabling Speed Number Dialing, Key Tone, Bluetooth Headset

Yes

IP8840 Broadworks IP Phone

User Guide

5.8. Enabling Speed Number Dialing

The IP8840 Phone includes a Phone Book that supports up to 100 entries. Each Phone Book record includes a two-digit Speed number, see Speed Number Dialing. When enabled, dialing the Speed number (00~99) sends the contact number or user id from the associated Phone Book record.

To enable/disable Speed number operation:

oPress the Setting () button.

oDial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the

OK softkey.

oDial 9, or move cursor to 9.Speed Number using the Previous-Next softkeys and press the OK softkey.

o Press		the	Yes	softkey to enable Speed number, or press			08:30
the	No	softkey to disable Speed number.				Speed Number
o Move to another parameter with the navigation buttons and						Current value is ‘Yes’.
continue the session or press the Setting (					) button to
exit the configuration session.						Yes
							No

5.9. Key Tone

When you press a button on the IP8840 phone, the phone will generate a beep tone to indicate that the button has been pressed. This key tone is optional and can be enabled or disabled using the key tone setting.

To enable/disable the Key Tone:

oPress the Settings () button. .

oDial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the OK softkey.

oDial 10, or move the cursor to 10.Key Tone using the Previous-Next softkeys and press the OK softkey.

o	Press the		Yes	softkey to enable the Key Tone, or press the		08:30
	No	softkey to disable the Key Tone.				Key Tone
o Move to another parameter with the navigation buttons and						Current value is ‘Yes’.
	continue the session or press the Settings (				) button to
	exit the configuration session.

No

5.10. Bluetooth Headset

Your IP8840 phone can be equipped with an optional Bluetooth module; you can use a Bluetooth headset with your phone. The icon appears in the upper line of the LCD if the module is installed. Instructions for installing the module are provided with the module or can be found in the IP8800 Installer Guide.

When paired and connected to a compatible Bluetooth headset, such as the IP-8502, the headset can control the On/Off hook status of the phone and audio is delivered from the IP8840 to the headset using wireless Bluetooth technology. In order to use a Bluetooth headset, the headset must be paired with and activated in the IP8840. The following sections provide instructions for setting up your IP Phone for use

22 Dec. ‘08