Ringer Off | Panasonic IP8840 instruction

oSelect the ring type using the Next softkey. Press the Play softkey to hear the selected tone. An asterisk, »,

displays in front of the current setting.

oPress the OK softkey to save your entry.

oMove to another parameter with the navigation buttons and continue the session or press the Setting () button to exit the configuration session.

To set delayed ring for a line:

08:30 Ring Type (1)

>*Set to Default Ringer Off Type 1

Type 2

Type 3

Type 4 Wave Ring 1

Play Next OK

oPress the Setting () button.

oDial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the

OK softkey.

oDial 2, or move the cursor to 2.Ring Setting using the Previous-Next softkeys and press the OK softkey.

o Dial the Line number plus one (2 for Line 1, 3 for Line 2,

Line 1 Configuration

08:30

etc.), or move the cursor to Line n Configuration using

the

softkeys and press the

softkey.

1.Ring Type

>2.Delayed Ring Timer

The value of n is the Line button number.

Dial 2, or

move

the cursor to 2.Delayed

Ring using the

08:30

softkeys and press the

softkey. . Note

Delayed Ring Timer (1)

the line number is shown in parenthesis after “Delayed

Ring Timer”.

o Using the dial pad enter the desired delay up to 10

seconds in one-second increments, zero is no delay. The

backspace softkey will delete the previous character and

Clear

the Clear softkey deletes the entire entry.

oPress the OK softkey to save your entry.

oMove to another parameter with the navigation buttons and continue the session or press the Setting () button to exit the configuration session.

5.3. Ringer Off

The IP Phone can be programmed not to ring when an incoming call is received. To set the Ringer Off parameter:

oPress the Setting () button.

oDial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the OK softkey.

Dec. ‘08