Panasonic KX-NT265 manual Important Information, Installation Environment, Placement

Page 1

IP Proprietary Telephone

Quick Reference Guide

Model No. KX-NT265

Important Information

When using the KX-NT265, keep the following conditions in mind.

If the unit does not operate properly, disconnect the unit from the Ethernetcable and then connect again.

If you are having problems making calls, unplug the Ethernet cable and connect a known working IP Proprietary Telephone (IP-PT). If the known working IP-PT operates properly, have the defective IP-PT repaired by an authorised Panasonic Factory Service Centre. If the known working IP-PT does not operate properly, check the Hybrid IP-PBX and the Ethernet cable.

Wipe the unit with a soft cloth. Do not clean the unit with abrasive powders or with chemical agents such as benzene or thinner.

Use only the correct Panasonic handset.

Do not disassemble this unit. Dangerous electrical shock could result. The unit must only be disassembled and repaired by qualified service technicians.

If damage to the unit exposes any internal parts, immediately disconnect the cable or cord. If the power is supplied from the network to the IP-PT [Power-over-Ethernet], disconnect the Ethernet cable. Otherwise, disconnect the AC adaptor cord. Then return this unit to a service centre.

Never attempt to insert wires, pins, etc. into the vents or other holes of this unit.

This unit is designed to aid the visually handicapped to locate dial keys and buttons.

This unit is designed to be installed under controlled conditions of ambient temperature and a relative humidity.

Avoid installing the unit in damp or humid environments, such as bathrooms or swimming pools.

999 and 112 can be dialled on the product after accessing the CO line for the purpose of making outgoing calls to the BT emergency (999) and (112) services (United Kingdom only).

Take special care to follow the safety suggestions listed below. Safety

1)The unit should only be connected to a power supply of the type described in the Quick Reference Guide or as shown on the label on the unit.

2)When left unused for a long period of time, the optional AC adaptor should be unplugged from the AC outlet, if you are using Power-over-Ethernet, disconnect the Ethernet cable.

Installation

Environment

1)Do not use this unit near water, for example, near a bathtub, washbowl or sink. Damp basements should also be avoided.

2)Keep the unit away from heating appliances and devices that generate electrical noise, such as fluorescent lamps, motors and televisions. These noise sources can interfere with the performance of the unit. It also should not be placed in rooms where the temperature is less than 5 ˚C or greater than 40 ˚C.

Placement

1)Do not place heavy objects on top of this unit.

2)Care should be taken so that objects do not fall onto, and liquids are not spilled into, the unit. Do not subject this unit to excessive smoke, dust, moisture, mechanical vibration, shock or direct sunlight.

3)Place the unit on a flat surface.

Image 1
Contents Placement Installation EnvironmentImportant Information Trademark Important NoticeMaking Calls Features ListDuring a Conversation Useful Features Before Leaving Your Desk Setting the Telephone According to Your Needs Message/Ringer Lamp When you Also used as feature buttons. Button assignment is requiredLocation of Controls LCD Liquid Crystal DisplayTo enter the programme mode To exit Settings on the Programming ModeConnection Tilt AngleEthernet cable Straight CAT 5 or higher cable not included AC adaptor Order No Wall MountingMount the unit on the wall 83 mmInstall 2 screws spaced 83 mm or To a Switching Hub LANTo AC Outlet Mm apart, to the wallFor business users in the European Union InformationCopyright