Panasonic KX-NT265 manual To AC Outlet, To a Switching Hub LAN, Install 2 screws spaced 83 mm or

Page 11

If you are using the Ethernet cable with boots, you can mount the unit
on a wall using the wall mounting plate (included) by following the
steps below.	To AC Outlet
	To AC Outlet
	Ethernet cable (Straight CAT 5 or higher cable) [not included]
	To a Switching Hub (LAN)
	1 Install 2 screws spaced 83 mm or 100
	mm apart, to the wall.
	100 mm 83 mm for base unit
	2 Insert the upper and lower tabs
	of the wall mounting plate (included)
	into the designated openings in the
	base unit, then slide it in the direction
	of the arrow until it clicks.

3Mount the base unit securely on the wall.

Screw

— 11 —

Image 11

Contents Important Information Installation EnvironmentPlacement Trademark Important NoticeDuring a Conversation Features ListMaking Calls Useful Features Before Leaving Your Desk Setting the Telephone According to Your Needs LCD Liquid Crystal Display Also used as feature buttons. Button assignment is requiredMessage/Ringer Lamp When you Location of ControlsTo enter the programme mode To exit Settings on the Programming ModeEthernet cable Straight CAT 5 or higher cable not included Tilt AngleConnection 83 mm Wall MountingAC adaptor Order No Mount the unit on the wallMm apart, to the wall To a Switching Hub LANInstall 2 screws spaced 83 mm or To AC OutletCopyright InformationFor business users in the European Union