Linksys WBP54G V2 manual Security Settings WEP 64-Bit Screen

Page 18

Wireless-G Bridge for Phone Adapters

WEP (128-Bit) or WEP (64-Bit)

Enter a passphrase in the Passphrase field and click Next. If you want to manually enter a WEP key, leave the Passphrase field blank and click Next.

Passphrase - Enter a passphrase in the Passphrase field, so a WEP key is automatically generated. The passphrase is case-sensitive and should not be longer than 16 alphanumeric characters. It must match the passphrase of your other wireless network devices and is compatible with Linksys wireless products only. (If you have any non-Linksys wireless products, enter the WEP key manually on those products.)

A new screen will appear. If you entered a Passphrase, the WEP key(s) will be displayed. If you did not enter a Passphrase, enter the WEP key(s) on this screen. Then select the key you will use from the Key Index drop- down menu.

Key 1-4 - One to four fields will be displayed, depending on the level of encryption you have selected. The WEP key you enter must match the WEP key of your wireless network. For 64-bit WEP encryption, enter exactly 10 hexadecimal characters. For 128-bit WEP encryption, enter exactly 26 hexadecimal characters. Valid hexadecimal characters are “0” to “9” and “A” to “F”.

Key Index - The default transmit key number is 1. If your network’s access point or wireless router uses transmit key number 2, 3, or 4, select the appropriate number from the Key Index drop-down menu.

Click Next to proceed, or click Back to return to the previous screen.

Figure 4-11: Security Settings - WEP (64-Bit) Screen

Figure 4-12: Security Settings - WEP Keys Screen

Chapter 4: Setting Up and Connecting the Wireless-G Bridge for Phone Adapters

12

Running the Setup Wizard

Image 18

Contents User Guide Copyright and Trademarks Word definitionTable of Contents Page Power Port Browsed Devices on Network Screen Select Bridge Introduction Adapter a device that adds network functionality to your PCWhat’s in This User Guide? Roaming Planning Your Wireless NetworkNetwork Topology Topology the physical layout of a networkNetwork Layout LEDs Getting to Know the Wireless-G Bridge for Phone AdaptersOverview PortCable Or IP phoneStarting the Setup Wizard Running the Setup WizardCheck for Compatibility Screen Power on the Bridge Screen Wireless-G Bridge Setup Screen WPA Encryption encoding data transmitted in a network11 Security Settings WEP 64-Bit Screen 13 Confirmation Screen Wireless-G Bridge for Phone Adapters 19 Wireless is Now Active Screen 20 Congratulations Screen Appendix a Troubleshooting Common Problems and SolutionsSpeed of the wireless connection is very slow What is the Ieee 802.11g standard? Frequently Asked QuestionsWhat is the Ieee 802.11b standard? What Ieee 802.11b features are supported?What is roaming? What Ieee 802.11g features are supported?What is infrastructure mode? What is the ISM band?What is WEP? What is Spread Spectrum?What is DSSS? What is FHSS? And what are their differences? What is WPA?Appendix B Wireless Security Security PrecautionsSecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Bridge for Phone Adapters To upgrade the Bridge’s firmware, follow these instructions Appendix C Upgrading FirmwareFigure C-4 Choose Destination Location Figure C-8 Browsed Devices on Network Screen Click Files Figure C-9 Open Firmware File Disconnect the Ethernet network cable from the PC Appendix D Windows Help TCP/IPAppendix E Glossary Wireless-G Bridge for Phone Adapters Wireless-G Bridge for Phone Adapters Wireless-G Bridge for Phone Adapters Wireless-G Bridge for Phone Adapters Appendix F Specifications WBP54GCertifications Appendix G Warranty Information Limited WarrantyObtaining Warranty Service Technical Support Appendix H Regulatory Information Dual-Band Wireless Access Point Wireless-G Bridge for Phone Adapters Wireless-G Bridge for Phone Adapters Wireless-G Bridge for Phone Adapters Wireless-G Bridge for Phone Adapters Dual-Band Wireless Access Point Appendix I Contact Information