Linksys WBP54G V2 manual Power on the Bridge Screen

Page 15

Wireless-G Bridge for Phone Adapters

5.Connect the power jack to the Power port of the Bridge. Then plug the power adapter into an electrical outlet. Click Next to proceed with the installation process, or click Back to return to the previous screen.

6.You will use the combination Ethernet network and power cable attached to the Bridge. Connect the Ethernet network cable of the Bridge to an Ethernet network (LAN) port of the router or PC. (Do not use the power cable now; you will use it later.)

NOTE: If you connect the Bridge to a router, make sure the Bridge and PC running the Setup Wizard are connected to the Ethernet network (LAN) ports of the same router.

Make sure the Bridge’s Ethernet LED is solidly lit or flashing.

Click Next to proceed, or click Back to return to the previous screen.

Chapter 4: Setting Up and Connecting the Wireless-G Bridge for Phone Adapters

Figure 4-5: Power on the Bridge Screen

Figure 4-6: Connecting the Network Cable to a

Router Screen

9

Running the Setup Wizard

Image 15

Contents User Guide Word definition Copyright and TrademarksTable of Contents Page Power Port Browsed Devices on Network Screen Select Bridge Adapter a device that adds network functionality to your PC IntroductionWhat’s in This User Guide? Topology the physical layout of a network Planning Your Wireless NetworkNetwork Topology RoamingNetwork Layout Port Getting to Know the Wireless-G Bridge for Phone AdaptersOverview LEDsOr IP phone CableRunning the Setup Wizard Starting the Setup WizardCheck for Compatibility Screen Power on the Bridge Screen Wireless-G Bridge Setup Screen Encryption encoding data transmitted in a network WPA11 Security Settings WEP 64-Bit Screen 13 Confirmation Screen Wireless-G Bridge for Phone Adapters 19 Wireless is Now Active Screen 20 Congratulations Screen Appendix a Troubleshooting Common Problems and SolutionsSpeed of the wireless connection is very slow What Ieee 802.11b features are supported? Frequently Asked QuestionsWhat is the Ieee 802.11b standard? What is the Ieee 802.11g standard?What is the ISM band? What Ieee 802.11g features are supported?What is infrastructure mode? What is roaming?What is WPA? What is Spread Spectrum?What is DSSS? What is FHSS? And what are their differences? What is WEP?Appendix B Wireless Security Security PrecautionsSecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Bridge for Phone Adapters Appendix C Upgrading Firmware To upgrade the Bridge’s firmware, follow these instructionsFigure C-4 Choose Destination Location Figure C-8 Browsed Devices on Network Screen Click Files Figure C-9 Open Firmware File Disconnect the Ethernet network cable from the PC TCP/IP Appendix D Windows HelpAppendix E Glossary Wireless-G Bridge for Phone Adapters Wireless-G Bridge for Phone Adapters Wireless-G Bridge for Phone Adapters Wireless-G Bridge for Phone Adapters WBP54G Appendix F SpecificationsCertifications Limited Warranty Appendix G Warranty InformationObtaining Warranty Service Technical Support Appendix H Regulatory Information Dual-Band Wireless Access Point Wireless-G Bridge for Phone Adapters Wireless-G Bridge for Phone Adapters Wireless-G Bridge for Phone Adapters Wireless-G Bridge for Phone Adapters Dual-Band Wireless Access Point Appendix I Contact Information