Linksys WBP54G V2 manual Disconnect the Ethernet network cable from the PC

Page 34

Wireless-G Bridge for Phone Adapters

15.The Upgrade Utility will upgrade the Bridge’s firmware. A pop-up screen will appear when the upgrade is complete. Click the OK button.

IMPORTANT: Do not disconnect the power adapter from the Bridge while the firmware is being upgraded. Otherwise, damage may occur to the Bridge.

		Figure C-12: Upgrade
16.	Disconnect the Ethernet network cable from the PC.	Successful
	If the phone adapter or IP phone is in a different room, disconnect the power adapter from the electrical
	outlet. Move the power adapter and Bridge to the location of the phone adapter or IP phone.
17.	Connect the Ethernet network cable of the Bridge to the phone adapter or IP phone.
18.	Connect the power cable of the Bridge to the Power port of the phone adapter or IP phone.
	If necessary, plug the power adapter into an electrical outlet.

Appendix C: Upgrading Firmware

28

Image 34

Contents User Guide Copyright and Trademarks Word definitionTable of Contents Page Power Port Browsed Devices on Network Screen Select Bridge Introduction Adapter a device that adds network functionality to your PCWhat’s in This User Guide? Roaming Planning Your Wireless NetworkNetwork Topology Topology the physical layout of a networkNetwork Layout LEDs Getting to Know the Wireless-G Bridge for Phone AdaptersOverview PortCable Or IP phoneStarting the Setup Wizard Running the Setup WizardCheck for Compatibility Screen Power on the Bridge Screen Wireless-G Bridge Setup Screen WPA Encryption encoding data transmitted in a network11 Security Settings WEP 64-Bit Screen 13 Confirmation Screen Wireless-G Bridge for Phone Adapters 19 Wireless is Now Active Screen 20 Congratulations Screen Common Problems and Solutions Appendix a TroubleshootingSpeed of the wireless connection is very slow What is the Ieee 802.11g standard? Frequently Asked QuestionsWhat is the Ieee 802.11b standard? What Ieee 802.11b features are supported?What is roaming? What Ieee 802.11g features are supported?What is infrastructure mode? What is the ISM band?What is WEP? What is Spread Spectrum?What is DSSS? What is FHSS? And what are their differences? What is WPA?Security Precautions Appendix B Wireless SecuritySecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Bridge for Phone Adapters To upgrade the Bridge’s firmware, follow these instructions Appendix C Upgrading FirmwareFigure C-4 Choose Destination Location Figure C-8 Browsed Devices on Network Screen Click Files Figure C-9 Open Firmware File Disconnect the Ethernet network cable from the PC Appendix D Windows Help TCP/IPAppendix E Glossary Wireless-G Bridge for Phone Adapters Wireless-G Bridge for Phone Adapters Wireless-G Bridge for Phone Adapters Wireless-G Bridge for Phone Adapters Appendix F Specifications WBP54GCertifications Appendix G Warranty Information Limited WarrantyObtaining Warranty Service Technical Support Appendix H Regulatory Information Dual-Band Wireless Access Point Wireless-G Bridge for Phone Adapters Wireless-G Bridge for Phone Adapters Wireless-G Bridge for Phone Adapters Wireless-G Bridge for Phone Adapters Dual-Band Wireless Access Point Appendix I Contact Information