Linksys PAP2-IG-v 1-0-042805 manual Disclaimer

Page 2

All Rights Reserved

© Copyright 2005

The use, disclosure, modification, transfer, or transmittal of this work for any purpose, in any form, or by any means, without the written permission of the copyright holder, is strictly forbidden.

Trademarks used herein are the property of their respective owners.

PAP2 Phone Adapter Installation Guide

Version 1.0

April 2005

Disclaimer

The content of this manual is subject to change without notice and should not be construed as a commitment by the manufacturer, distributor, or service provider. This manual is furnished for informational use only and the manufacturer, distributor, or service provider assumes no responsibility for any errors or inaccuracies that may appear herein.

Any services provided through this equipment are not intended to replace or be a substitute for primary line voice services or Plain Old Telephone Service (“POTS”) and are not meant to provide guaranteed Automatic Number Identification or Automatic Location Information capabilities associated with 911 or E911 services or to permit access to 411 directory assistance services. The manufacturer, distributor, or service provider will not be liable for any damages, expenses, liabilities, risks, or harms arising out of or related to the services provided through this equipment.

4.18.2005

Image 2
Contents PAP2 Phone Adapter Disclaimer Table of Contents Introduction Adapter Description Connectors and PinoutsAccessing the PAP2 PAP2 OverviewCheck Dhcp Manual RebootEnter IVR Menu Set DhcpProvisioning General Configuration for Outbound CallingTo configure the PAP2 for outbound calling Service Type Field Display Name Line-Specific ConfigurationField Value NAT Keep Alive Enable Display Name LineField Value Preferred Codec AVTAudio Configuration and Dial Plan Sections