Linksys PAP2 Installation Guide
3.2Line-Specific Configuration
1.Click the Line1 or Line2 tab at the top of the page, and in the NAT Settings section, change the following setting:
Field | Value |
|
|
NAT Keep Alive Enable | no |
|
|
2.In the Proxy and Registration section (see the screen on the following page), change the following settings:
Field | Value |
|
|
Proxy | byod1.net2phone.com |
|
|
Use Outbound Proxy | no |
|
|
Use OB Proxy In Dialog | no |
|
|
Make Call Without Reg | yes |
|
|
Ans Call Without Reg | yes |
|
|
DNS SRV Auto Prefix | no |
|
|
3.In the Subscriber Information section (as shown in the Line1/2 Window screen on the following page), enter a Display Name. This value can be any alphanumeric string. Enter the following values for outbound only service:
| Service Type |
|
| Field |
| Display Name |
|
|
|
|
|
| Value |
|
|
|
|
| ||
|
|
|
|
|
|
|
| OUTBOUND SERVICE ONLY |
| Display Name (Line 1) |
| NO_DID1 | |
|
|
|
|
| ||
|
| Display Name (Line 2) |
| NO_DID2 | ||
|
|
|
|
| ||
|
|
|
|
|
|
|
4.Enter the User ID (account) and Password (PIN).
IMPORTANT
You must have a different account and PIN for Line 1 and Line 2.
5.Click the Use Auth ID
Page 5