Linksys PAP2-IG-v 1-0-042805 manual Enter IVR Menu, Check Dhcp, Set Dhcp, Check IP, Check Net Mask

			Linksys PAP2 Installation Guide
		PAP2 MENU OPTIONS
Action	Code	User Input	Behavior Notes
Enter IVR Menu	****	None	Do not press any other keys
			until you hear, “Configuration
			menu. Please enter option
			followed by the pound (#)
			key, or hang up to exit.”
Check DHCP	100	None	The system announces if
			DHCP is enabled or disabled.
Set DHCP	101	Enter 1 to enable.	Enter the option, followed by
		Enter 0 to disable.	the pound (#) key.
Check IP	110	None
address
Set IP Address	111	Enter value using the	Enter the value, followed by
		numbers on the	the pound (#) key. DHCP
		telephone keypad. Use	must be “Disabled,”
		the star (*) key when	otherwise you will hear the
		entering a decimal point.	announcement, “Invalid
			Option” if you try to set this
			value.
Check Net Mask	120	None
Set Net Mask	121	Enter value using the	Enter the value, followed by
		numbers on the	the pound (#) key. DHCP
		telephone keypad. Use	must be “Disabled,”
		the star (*) key when	otherwise you will hear the
		entering a decimal point.	announcement, “Invalid
			Option” if you try to set this
			value.
Check Gateway	130	None
Set Gateway	131	Enter the value using the	Enter the value, followed by
		numbers on the	the pound (#) key. DHCP
		telephone keypad. Use	must be “Disabled,”
		the star (*) key when	otherwise you will hear the
		entering a decimal point.	announcement, “Invalid
			Option” if you try to set this
			value.
Check MAC	140	None	You will hear the phone
Address			adapter’s MAC address.
Check Firmware	150	None	You will hear the phone
Version			adapter’s firmware version.
Manual Reboot	7326668	None	After you hear, “Option
			successful,” hang up the
			phone. The phone adapter
			will automatically reboot.
PAP2 Menu Options
		Page 3