AT&T SB67128 Registration, Repeater registration, On the telephone base, press MENU/ENTER

Registration

You should register your repeaters to the telephone base before choosing locations for them in the building.

NOTE: You can register a repeater to an SB67118 telephone base without deregistering it from a previous telephone base. New registrations overwrite any previous repeater registrations.

Repeater registration

1.Plug in the repeater to AC power. The STATUS indicator light on the repeater flashes slowly.

2.Press and hold the SETUP button at the bottom of the

repeater for two seconds. The STATUS indicator light on the repeater flashes quickly.

3. On the telephone base, press MENU/ENTER.	STATUS
	indicator light

4.Scroll down to Registration and press MENU/ENTER.

5.Press MENU/ENTER again to select Register HS. The

telephone base screen shows Handset registering during registration.

6. The STATUS indicator light becomes solidly lit when

registration is successful. The telephone base screen SETUP button shows Repeater registered. It takes about 60 seconds

to complete the registration.

NOTES:

�. If the registration is not successful (the STATUS indicator light is not solidly lit after 60 seconds), the telephone base screen shows Error. Try the Repeater registration process again.

2.A registered repeater does not count as an extension and does not have an assigned extension number within the telephone system.

3.For complete registration instructions of SB67118 telephone base, please refer to the

manual provided with your AT&T SB67118 product, or visit

www.telephones.att.com to download the manual.