AT&T SB67128 user manual Screw spacing=2.5 inches

Page 8

Installation

If you want to install your repeater on a wall or other object, use the provided screws. Professional assistance may be required to install screws on the wall. Then plug the large end of the power adapter into a nearby electrical wall outlet and raise the antennas.

Screw holes

^

^

Screw spacing=2.5 inches

Figure 5: Wall installation

NOTE: The power adapter is intended to be correctly oriented in a vertical or floor

mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.

Image 8

Contents SB67128 Dect Repeater Before you install Parts listPlanning repeater placement Feet About the repeaterOn the telephone base, press MENU/ENTER RegistrationRepeater registration Status indicator light Slow flashInstallation Connect the power adapter to the repeaterTabletop installation Screw spacing=2.5 inches Troubleshooting Troubleshooting General product care Technical specifications Repeater operating range