Troubleshooting
My repeater cannot register to my telephone base.
•First try all the suggestions on the previous page.
•Make sure your telephone base is model AT&T SB67118 DECT 6.0
•Carefully follow the registration instructions on pages 3 of this user’s manual.
•Make sure your telephone base is within 950 feet of the repeater. If registration does not work, place the repeater next to the base and try registering again.
My repeater | • | First try all the suggestions on the previous page. | |
flashes slowly | • | Make sure the telephone base has power. | |
again after | |||
|
| ||
registration. |
|
| |
|
|
| |
I cannot | • | You can register a repeater to an SB67118 | |
deregister my |
| telephone base without deregistering it from | |
repeater from |
| a previous telephone base. New registrations | |
the previous |
| overwrite any previous repeater registrations. | |
telephone base. |
|
| |
|
|
| |
Power failure | • | Your registered repeater automatically links to | |
recovery. |
| the telephone base wherever power is restored. | |
|
| The STATUS indicator light is on when there is | |
|
| a valid link. |