Examples | Grandstream Networks HT-496 instruction

PLACING A PHONE CALL

PHONE OR EXTENSION NUMBERS

1.Dial the number directly and wait for 4 seconds (Default “No Key Entry Timeout”); or

2.Dial the number directly and press # (Use # as dial key” must be configured in web configuration).

Examples:

1.Dial an extension directly on the same proxy, (e.g. 1008), and then press the # or wait for 4 seconds.

2.Dial an outside number (e.g. (626) 666-7890), first enter the prefix number (usually 1+ or international code) followed by the phone number. Press # or wait for 4 seconds. Check with your VoIP service provider for further details on prefix numbers.

DIRECT IP CALLS

Direct IP calling allows two parties with VoIP devices (e.g. a HT–496and another VoIP Device), to talk to each other in an ad hoc fashion without a SIP proxy. Direct IP calls are possible if:

a)Both VoIP devices use a public IP address; or

b)Both VoIP devices are on the same LAN using private IP addresses, or

c)Both VoIP devices can be connected through a router using public or private IP addresses (with necessary port forwarding or DMZ).

To make a Direct IP Call, use either the handset or the speakerphone. Access the IVR using “***”, the button on the HT–496or “47”. After dial tone, enter a 12-digit target IP address to place a call. Destination ports can be specified by using “*4” (encoding for “:”) followed by the port number.

Examples:

a)If the target IP address is 192.168.0.160, enter the 12-digit IP address (e.g. 1921680160) after the voice prompt followed by the “#” key or wait for 4 seconds. The default destination port 5060 is used if no port is specified.

b)If the target IP address/port is 192.168.1.20:5062, enter the 12 digit IP address + *45062 (e.g. 1921680160*45062) after the voice prompt followed by the “#” key or wait for 4 seconds.

CALL HOLD

Press the “flash” button to place a caller on hold. Press the “flash” button again to release call hold.

CALL WAITING

If call-waiting feature is enabled, call-waiting tone (3 short beeps) indicates an incoming call. Toggle between incoming call and current call by pressing the “flash” button. First call is placed on hold. Press the “flash” button to toggle between two active calls.

CALL TRANSFER

The HT–496 supports both blind and attended transfer:

1.Blind Transfer: Press “flash” button (or hook flash on older models), dial *87, then dial the number to transfer call and press the “#” key (or wait 4 seconds) to complete transfer of active call.

Grandstream Networks, Inc.	HT–496 User Manual	Page 11 of 33
	Firmware 1.0.3.64	Last Updated: 1/2007

VoIPon www.voipon.co.uk

sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030

HT-496 specifications

Grandstream Networks HT-496 is a cutting-edge Analog Telephone Adapter (ATA) designed to bridge the gap between traditional telephone systems and modern Voice over IP (VoIP) networks. As telecommunications technologies continue to evolve, devices like the HT-496 play a crucial role in ensuring seamless communication across diverse platforms.

One of the main features of the HT-496 is its ability to support up to four simultaneous calls. This is particularly advantageous for small to medium-sized businesses that rely on efficient communication to manage customer interactions and internal coordination. The device comes equipped with two FXS ports, enabling users to connect their existing analog telephones directly, ensuring that they can continue using familiar equipment while benefiting from the advanced features of VoIP technology.

The HT-496 supports a variety of voice codecs, including G.711, G.726, G.729, and G.722, allowing for high-quality audio transmission even in bandwidth-constrained environments. This flexibility ensures users can choose the codec that best fits their specific network conditions, optimizing both call clarity and resource efficiency.

In terms of management and security, Grandstream has integrated several advanced technologies into the HT-496. The device includes support for SIP (Session Initiation Protocol), making it compatible with a wide range of VoIP services. Additionally, it features various security mechanisms, such as SRTP (Secure Real-Time Transport Protocol) and TLS (Transport Layer Security), ensuring that voice communications are encrypted and protected from potential threats.

Installation and configuration of the HT-496 are user-friendly, thanks to its web-based interface. This makes it easy for both technical and non-technical users to manage settings, adjust parameters, and monitor system performance. Furthermore, the device supports automatic provisioning, allowing for quick setup with minimal manual intervention.

Another notable characteristic of the HT-496 is its compact design, which enables easy placement in any office environment. Its durable construction ensures reliable operation over time, making it a cost-effective solution for businesses looking to transition to VoIP technology without discarding their existing analog devices.

In summary, the Grandstream Networks HT-496 features a robust design, compatibility with a variety of voice codecs, advanced security protocols, and user-friendly management options. These characteristics make it an essential tool for businesses seeking to enhance their communication systems while maintaining a connection to traditional telephony. By investing in the HT-496, organizations can simplify their transition to VoIP and unlock the full potential of modern telecommunications.