UNIDEN Model uh095sx Dual Band (UHF CB/AM CB) Radio
Operation
Setting the FM (UHF CB) Squelch
The FM Band has an Automatic Squelch Control. It requires no adjustment. However, if you are in a very high noise area it may break through. The uh095sx has 3 preset squelch levels:
1 - Normal sensitivity (minimum squelch)
2 - Medium sensitivity (medium squelch)
3 - Minimum sensitivity (maximum/tight squelch)
Select FM only by pressing AM/FM .
Press and hold MON /FM SQ/
. The squelch preset will flash. Use 
or 
to select
preset 1, 2 or 3. Press MON /FM SQ/
to store. The tight squelch icon SQT flashes if level 3 is selected.
Monitor
Press MON momentarily to open the squelch and receive all weak signals. MON appears on the display when on.
Press MON again momentarily to cancel.
Selecting a Channel
Press AM/FM to select either AM or FM or both AM + FM . Press CH | or | to |
select the desired channel. |
|
|
For your reference a list of the available channels, corresponding frequencies and guidelines for their use is printed on page 15. For Australia, UHF CB/FM Channels 05 and
35 are reserved for Emergency Calls.
Dual Watch
Dual watch will continuously monitor the Instant channel no matter what other channel or band you are on (Instant Priority Channel see p8).
Press and hold AM/FM /DUAL to turn Dual Watch on or off. DUAL appears on the display when on.
7